Search results

that oughta get me through and behind the mountains......... anxous to try em all out. My disco is stuck in New York customs and my pixim cam came DOA so had to order another ems this time thanks guys, will post the results shortly. really like the immersion gear. The way they deal with an rc's...

I'll grab one this weekend when i go flying. It is as bright if not brighter than the 22" I don't think visibility is a problem with it. I have a car type in my trucks dash and unless it's dark i can't see anything so i get the bad brightness, but this one seems pretty normal. on there site...

I run suppo motors on fpv frames with those two types of vibration isolation and get this foam plugs that vibration silicon pad thing both are 1080p,,,,,,,

You need to make a bed of ear plugs or bite the bullet and get the silicone pad, both do very well with the jello, ones $3, other is $100 http://vibrationmounts.com/Store.asp?Page=Products8.htm green pad for 900-1000kv motors, yellow for the 700-800kv

absolutely. setting the gains in manual mode first then dialing in atti is the way to get it really smooth. Manual can get rock solid

Try turning down the gains on the manual mode. Try something like 120 across the top, 90 on the bottom row and leave the gimble gains alone for now. Go make another flick and lets see the lens is called layer lens from fpvmanuals.com....... keeps the glass lens in tact and ditches the case...

my sources were http://www.rcgroups.com/forums/showthread.php?t=1377791 http://www.rcgroups.com/forums/showthread.php?t=1388264 http://fpvlab.com/forums/showthread.php?3626-Crosshair-10-dbic-Circularly-polarized-antenna-tutorial!

yea, yea, Disco. You know your a nerd when your gettin off making microwave antennas with wave traps. all i need is a pocket protector and set of glasses chat at ya later

haha..... been doing some sellin off the old, in with the new I'm sure that's what shes thinkin though she just wishes the work never ended without buying another one. Can't that one take longer?

better lighter less obtrusive gopro and board cam mount with jello free mount Got all the spars mounted, got all the seams filled with glue. got a bitchen heat sink on the vtx. Should be ready to wrap tomorrow. Waiting for the gorilla glue to finish expanding. Turned it all on today and...

Got the rx and tx today. Since they were due in, i blew off workin and went to home depot for some supplies. Got some poplar strips and some 3/16 copper roll. I'm hard on the gear down there and didn't want it to be fragille, and the roll is suppose to be better. Wasn't that much money...

i was thinking of going backwards from ppm to sbus........

shows static, but goes black when the signal is flat out gone http://www.foxtechfpv.com/foxtech-m700-7-monitor-p-575.html in my case the 5.8 that transfers the other from GS to craft is always on so mine does stay static, but as soon as i kill that 5.8 tx it goes black with blue screen turned off

keeps your eyes peeled in the fpv classiifieds at fpvlab and rcg for vtx's. you probably want to put that 800mw on a zeph and get something smaller for your quad. suppo makes a decent motor, same with rctimer,,, 30mm, 600+ watts. for servos they recomend over 100 oz tq servos, if your flying...

i only flew early in the morning but stood outside and had no problems at all. one of the arrows had a coarse brightness setting, like 6 clicks goes from black to white, but the osd inside had 0-100 for all the settings, mine were on 50 across the board. i was wearing polarized glasses too...

I still got it on zephyr and will still use it on anything i can for the penetration, but any naza with a gps needs to be aware of it not liking each other. That 1258 with the saw filter is clear...... i got the digital and the tan one and the tan one is a bit cleaner. looks like immersion...

got it working, just wouldn't get any range out of the video...... too much interference

Mine and a couple others have experianced problems with 1.3 800mw vtx's and this dji gps. i was able to get the naza gps to work with a 300mw 16" away but it screwed with the video reception at 800-900 feet and i was pissed. Came home and ordered a 2.4 lawmate vtx and a immersion duo2400 to cure...

I don't have one, but alot of guys at fpvlab sure do

Got this one coming in tomorrow http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=1&products_id=507 gonna put a bunch of power in it and see what i get. worse case it takes two of them to get it right