Search results

  1. kloner

    1001copters.com Pinwheel 5.8 Ghz with SWR<1.5 garantee

    there are all kinds of different rhcp patch antennas. crosshair and helicals are the best, like these. you had shown me some of the guy you get yours from in a post before http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_45_49&products_id=936...
  2. kloner

    naza gps mounting

    I got a futaba 8j radio and suddenly all my problems went away with both uhf systems. Best $279 i spent on the hobby zeph is ready to rock too now, finally. my 11x wouldn't let me mix on the way out so that meant no expo, no reversing, nothing but pure raw ppm like a trainer radio. I can...
  3. kloner

    DJI F330 arf

    Sold
  4. kloner

    naza gps mounting

    flew a few packs and the sat where it's mounted is perfect. next i'll power up the eagle tree and see what that does to the mix i hate that gps mode, feels like driving with brakes on
  5. kloner

    DJI WKM Firmware 5.12 Update

    if the nose is down, does the compass rotate? if nose is to the side and rotated, the compass points at all 360 degrees
  6. kloner

    Naza failsafe

    theres not alot to hope, it is something you see happen in assistant. bind the failsafe, turn off your tx in assistant and the failsafe bar should turn blue and the throttle should go up
  7. kloner

    DJI WKM Firmware 5.12 Update

    the news has been showing how the largest eruptions on the sun ever were going on over the last week....... wonder what these do when the gps cuts out from solar whatever or if it does at all
  8. kloner

    Naza failsafe

    on that binding part, for spektrum you want to power up the rx with the bind plug in then pull the bind plug before actually binding. that enables all channel failsafe instead of throttle only. that way your stick position once over failsafe in naza is also part of the failsafe set
  9. kloner

    Naza failsafe

    go into endpoints on the gear channel and make it move the slider to blue failsafe then bind to it with the failsafe lit and the throttle up over 10%........... i use like 20-30% ish just to be safe
  10. kloner

    Won't Start

    was just looking over your pictures again and noticed something else. you used everything they gave ya in the kit wire wise. While that's convienant, it's not really quad ready as in it has alot of extra really big and cheap connectors, extra wire, etc. To get what you got here working you'd...
  11. kloner

    Won't Start

    I'm 99% sure that's your problem unless you did something else to it swapping out the gear like foul up the gps wire, make it loose, etc. alot of things depend on the build skills. but, that is an obvious no no to use that with this. mines got the 800mw in the same brand you have an i don't have...
Top