Search results

I've rarely seen over 40 amps in atti, 60 in manual............ 4s 9" and 3s 10" are about identicle draws, 10" on 4s doesn't draw a whole lot more unless manual and full throttle. Atti is like a governor, it keeps some reserve for the other props the whole time the algorythm is running and it...

whats it do if return to home is enabled when its in atti, not gps atti? yellow sparks

are you getting red flashing on the vu led? are you waiting for that to stop before taking off?

That should work,,,,, try it and let us know. i've only had a functioning core for 3 days so i'm new to all this one thing i can tell you is this frame makes your ezuhf become a super hero. i ran low output, small antenna on the tx and the rssi never went below 98% no matter what i did i've...

yes, used the top plates internal part for transfering the signal, then used the analog out on ch8 of the ezufh but i also added that thing i posted before, ppm to analog out, makes a solid link. then when you turn on this thing, hit that button on the core to get into setup, when you enable...

how cool would that be,,,,

it all depends on your weight I've run both on both and they both work good. I've logged every session from the logger/osd and never seen more than 50 amps in either setup total. but in some cases the 10's will want to hover at 1/4 stick, then flipping over to atti makes a huge rise. these days...

put the bind plug in and fire up the rx, should blink fast. to program one failsafe just turn on the tx however you want the failsafe set while holding in the bind button at the rear. light should go solid. if you need to program multiple failsafes on jr rx's, put the bind plug in, fire up the...

http://www.targethobby.com/spectrum-ar6200-dsm-2-6ch-full-range-receiverwith-satelite-p-4162037.html

all in atti...... thanks. when i get to flying in manual shortly, you'll know cause it'll be upside down a bit. honestly the naza has me scared. Want to build one of these with a cc3d next when us normal people can have one. this thing sure is darty, tail heavy feeling but my weight is a little...

you need a real receiver for either radio. in fact there both dsm2 so and if it is and not fm, that'll bind right now to that 61xx...... the problem is thats a park model rx, no preset failsafes to make, no reception, made to live in a foam plane, not cf frame, etc you need something like this...

vid you can see i'm hesitant. new monitor, new to flying low and the lack of an altimiter all got me on edge, but i'll get used to it. it's real sensitive to elevator, like a flying wing....... gotta tune her in, but not bad for 5 packs in

one last flight, worked perfect except it's back on 2.4 so....... Futaba radios sure are nice. i'm never going back

WAIT, oh yea, you don't have failsafe with the little rx. you really need a fullsize, even if it's a clone 6200, at least it's not a micro park flyer rx. there like $20

I'm such a dork. last night all i had to do was hook up the gopro wire, when tried to take it off my old zeph, it broke the wires in the connector. for some reason i had it in my mind what was what and when i kicked it on, i had this crazy scrambled picture. messed with it and messed with it...

thats a good idead just got back the disco maiden, vids uploading. shes got mad power but flies alot different than my kloners, probably motor related. super fast, but altitude is super weak from what i'm used, never have pushed the sticks so hard in my life, had to use the elvevator and not...

what does just comes down mean? what kinda voltage is the pack when you pick up the pieces? Is failsafe set? if the radios loosing signal, i'd start moving the sattelites around. the cf frame can be blocking some of it. are the motors shutting off? slowing down? props spinning on the shaft?

try 120ish +-10 and see what it does. should go from not very locked in and kinda a handful to wobbly with the slightest throttle but stayin there...... right between there is best

heres that water buoy thing installed. Might paint it black, but am thinking a little color might be good for finding it later if she ever went away. Glued it on with contact adhesive like everything else.......... should blow out right over the camera and float the nose or at least become...

thanks it's some cheap carbon fiber printed vinyl from ebay. i get 2x 60"x24" for $36 to my door. aint bad, spray it with loctite 200 and lay this over it while tacky pretty much locks it in. im not one to hang onto crashed stuff to long so as long as the legs stay under it when it lands, it...