Search results

do all you guys take off in atti? Try lifting it off the ground in manual and flip to atti and tell us if it still has weird up and down movements.

replied to your pm. i'm really happy with the naxa, just make sure to turn off blue screen on signal loss and go through the setup, there was also a turn off if loss of signal. needs a mount though, tripod would be good, vesa truck mount would be better

that sounds like the flight mode not centered or interference making glitching. when you open assistant, find out how many clicks manual stays lit blue, then center that, do the same for each mode and make sure there nice and centered. interference is a *****. seems like i deal with it on...

I really like the 2810's, but i wish they were a 700800kv so could get better loading with the 9x5. the 8" are working good on 4s and 10" on 3s are both pulling the same watts, hovers just over 260, can fly along 320-400 max full tilt. the 2814 were 22 grams heavier each , that's 3 oz They come...

and the measurements are right? if it's towards the green line it's negative, red line is positive?

the whole video i was waiting to go down into the trees, then found out why............. good job dude

that's sweet, your gonna dig it. i got the same thing, mines in frankfurt now.

i've got 10 grey, 2 black gws 3 blade 10x6x3 props. These fit anything but were used on a dji f450. there better than stock, won't explode cause they got a massive hub and they fly great. $15 to your door. these feel and fly like 10x5 2 blade props. Amperage draw is the same

does it wobble while you fly or is it only when it hovers? I can't stand flying in gps, i still like regular old atti or manual best.

does that convert sbus to ppm?

do you have an osd or logger? that's the best way to tell by looking at your amperage draws/watts

yep

there is positive running through the top and negative running through the bottom. biggest thing to do is make sure none of the copper from the top makes contact with the bottom. i use a file or knife to clear the holes. it is pretty hard to drill through

tried a couple of the turbine and windmill,,,,,,,,, wasn't as clean as the coverleaf but were alot easier to make. isn't that one suppose to be on the vrx? You ever finish that 900?

3 lobe tx, 4 lobe rx.......

yes, frame, but if you want to use a camera transmitter with a uhf long range system, you want the core, you want it installed and you want the shield. that will make the least interferrence

theres only one place http://www.team-blacksheep.com/products/product:98

got it locking in inside the house now....... think a few things played in there. it was painted....... i was running a 800mw vtx on a really small area with uhf and another sattelite. The only spot i can get it to not make interferrence is all the way out back on top of the uhf rx. had to...

flew this thing today with everything on and walla, kept loosing gps signal on the naza in flight. Eagle tree never waivered,,,,,,,,, so gonna spread em apart a little bit. I also changed the video tx from that 800mw 1.3 to 300mw 1.3 to kill the interference issue. Strange, other cat was helping...

good fpv frames are marketed as such. look at team black sheep discovery hover things fpv manuals one thing you'll notice in common is they all got room to layout this stuff without getting interferrence and there made for carrying weight. The one your looking at IMO is a novelty thing