Search results

  1. kloner

    naza gps EXPO

    no, they should be dialed in individualy
  2. kloner

    check this out

    this one is SOLD..........
  3. kloner

    It flies - what a learning curve!

    now go back through calibrate, hit start, roll the 4 stick movements around, before hitting finish, flick the throttle hold or f mode switch to make throttle where you want it to hold and hit finish. Go take off get it up 10 feet and fly it with the switch on. if it falls often and frequent...
  4. kloner

    Beta test : IMaxRC FPV System

    typically when you talk about problems so close a couple things come to mind from teh pictures. You want the rc rx and the video tx as far apart as possible, you want the video tx as far away from switching regulators like the naza vu........ castle bec anything, etc.the sattelite usually likes...
  5. kloner

    gopro 960

    that's what i'm thinking, maybe add a rear facing cam from time to time,,,,,,
  6. kloner

    It flies - what a learning curve!

    http://www.spektrumrc.com/ProdInfo/Files/SPM8800-Manual.pdf these crazy spektrum radios..... on page 25 it shows a throttle cut. i'm not so sure that's teh one i was thinking of. a solid way of doing it is to assign throttle curves to the flight mode switch and make a curve 50% all the way...
  7. kloner

    gopro 960

    have any of you guys ever used a hero 960? I fly that mode in fpv on a hero2 and not sure what all differences there are? is this thing like a hero1 in how the video looks? better or worse? there down to $120, seems like a good way to go on fpv craft where the camera is unprotected and flying...
  8. kloner

    Naza and FPV - Your thoughts

    in Belgium Europe, when you take off, is it 10,000 feet in the alps or is it sitting on the beach sea level?
  9. kloner

    It flies - what a learning curve!

    in heli mode you can assign the top back right switch to Throttle hold, put that to 50%. just remember when your sitting there trying to start your motors and it won't start to make sure that switch is off, when it won't come down as well. The biggest thing the manual doesn't mention is the...
  10. kloner

    Naza and FPV - Your thoughts

    whats the elevation where you fly?
  11. kloner

    Hoverthings HT-FPV in digi camo

    I gotta hold off for the moment but am interested. will see if it's still around in a week
  12. kloner

    Naza and FPV - Your thoughts

    it should do pretty good where are you at?
  13. kloner

    Qav500 builds

    is that you at the end? your friends jumping out of the water looked cool That things crazy long aint it. is that 2.4 video? did it screw with the naza gps?
  14. kloner

    Hoverthings HT-FPV in digi camo

    how much to ship it to the us? Can it be taken apart to get small? that thing screams me
  15. kloner

    It flies - what a learning curve!

    Tx Cali section. hit start, move the sticks all around, move the throttle to exactly 50% and hit finish
  16. kloner

    Naza and FPV - Your thoughts

    this was my first go at fpv. you'll notice right off the bat the nervousness it has with a fast oscilation at 2:27 it started locking over. in rc helis, i remember seeing the same thing from the align 3g's, they do somehting similar spooling up. judging by the video, i m guessing vibes also...
  17. kloner

    Naza and FPV - Your thoughts

    these are all naza via fpv After playing with it for a while i'm finding alot of peoples problems are high gains making a lock over type thing happen in flight. once i got my gains down out of 140-150 on top and 100 on the bottom down towards 125 up top, 85-90 on bottom it totaly stopped...
  18. kloner

    video Ground Station

    the helical is sweet!
  19. kloner

    It flies - what a learning curve!

    I started RC back when was 12-13 in 1982-83 with tamiya frog and a futaba box radio. the altitude part, you want to make sure your centering the throttle stick to exactly mid stick, in dx8 you can see it if you look at throttle curve, will show 50% when your there. then click finished. this...
  20. kloner

    immersionRc 5.8Ghz on 4S ?

    it stays exactly the same, there is a voltage regulator inside it on the immersion vtx. all the other brands need external regulating the biggest things to watch on all transmitters is never turn it on without an antenna. heat, yea, that's why alot of the other brands come in heatsinks, but are...
Top