Search results

You are looking at a custom built UAV purchased and assembled in 2013. The manufacturer of the frame is Hexacrafter. This is a heavy lifter UAV that can be fitted with a multiple of various gimbals to lift large, high end cameras. Right now it is fitted with the Hexacrafter HC2 camera gimbal...

I have learned from several sources that it is possible to run both Lightbridge and Zenmuse but not have Lightbridge control the Flight Control. I have heard of incidents where this has caused problems and crashes. So I have Zenmuse connected as instructed except no Sbus connection. When...

I have searched and could not find much help on my set up issues so I created this new post. First issue is when camera is mounted the rubber eye cup hits the gimbal when tilting down. I have searched and read conflicting solutions. One is to remove the cup and the other claims if you remove...

This one is really baffling me and if you have any insight it would be appreciated. This is the set up: Sony Nex7 HDMI out with Hyperthin cable to HDMI converter to Immersion 600mw Video TX. What happens is 70 - 80 % of the time I get an image on my ground station but then sometimes when I am...

After having the M10 for about 4 months I have decided it is overkill and too much gimbal for me. I purchased it used but in excellent condition with the expectation that many of my clients would want to fly larger cameras like a Red Epic. As you all know the M10 can handle cameras up to 12 lbs...

I can't connect to Naza M V2 assistant on anew laptop running Windows 10. The program is installed but is not working. The interface opens up but no connection with Naza. I thought maybe I need these:, DJI WIN Driver Installer, but I can't get the drivers to install, I get the message: This app...

This is a build that I have been flying for about a year but recently have been having issues with. My last job the copter started spinning when landing and crashed into a tree. I had WKM V2 on it and thought it might be the culprit so I decided to get A2 and that is installed now but I am...

I have not moved to 4K video yet, first I was going to get the GH4, then I was considering the Sony A7S and then I heard about the G7 for $800 with kit lens. I had already tried setting up a borrowed GH4 but was not able to get video out converted because the GH4 HDMI output is not compatible...

I have been using a Sony Nex7 for years, first with a separate FPV camera sitting next to the camera and then I switched to transmitting the converted HDMI signal for more accurate composition. However lately the FPV video image drops out, first intermittently and then sometimes for the rest of...

I was searching online to see who was offering UAV services in my area and came across this company: http://www.productionhub.com/find-work Looks like a great way to get more business, Anyone here use this service or have heard about them?

I'm about to invest in a Freefly system, time to move on and away from Alex Mos, (which has enabled me to produce some excellent footage but there are just too many issues. So I am hoping there are users out there that can put their 2 cents into this. Brand new the M5 is $4000 and comes with...

I am going to Costa Rica for a job videotaping a resort with my custom built HC800. I know I cannot bring lipos of this size (5000 mAh) on the plane, (this subject has been covered in forums extensively). I have checked with UPS and it will cost about $600 in shipping fees plus duty fees of 42%...

Pretty sure my antenna puck is bad. Anyone have a used one for sale? thanks John

I just installed the Naza V2 on the Hexacrafter 650. First I kept getting error message 27 that I needed to do advanced calibration of the IMU and no matter how many times I did it it still kept saying I need to do it. I did many times and kept recycling the power and finally I got the copter...

So I have my brushless Gimbal fine tuned and working pretty good, it's a Hexacrafter http://www.hexacrafter.com/index.php?id_product=73&controller=product with Alexmos board and IFlight 4008 motors. The problem I am having is I have my FPV set up with HDMI out from the Nex7 to Freefly's HDMNI...

Setup: 3520 T-Motors Maytech 65 A Simon Flashed Opto ESCs 15x5 Xoar props Latest WKM firmware flashed Idle Speed set to max Here is what happens every 4-5 times I start up: http://www.youtube.com/watch?v=UBE8Ytv6_K8 Fast forward to about 1:17 to see #1 motor not starting Anyone having this...

I am using a Skyrover Mini Camera Gimbal that has two Hitec HS-5245MG servos plugged into the Naza F1 and F2 on my F550. It was working fine for a few weeks but now it jerks up and down repeatably. When on the ground in idle it is stable but as soon as I lift off it starts going up and down...

I put the frame together last week of the carbon fiber frame made by Andrew at Hexacrafter and it is looking great Andrew has incorporated a brass bus bar instead of the standard power distribution board and it requires using a mini torch to get the solder flowing. Not pretty but gets the job...

I am on the cusp of graduating from flying my F550 to a more steady heavy lifter. I have studied all the known biggies; Cinestar, Droidworx, Dragonflyer, Hoverfly and Aericam. However there is another candidate out there that has very little talk about it and I started this thread to see if I...