AlienEclipse
Member
Howdy,
So ive just bought a second hand Blade 350 QX to learn to fly multirotors, but have been spending a lot of time researching and coming up with my first DIY build.
I'm looking at a hex and something that is a good starting platform for aerial filming and fpv. I plan to start with using a GoPro and move up to the likes of a Sony NEX.
So ive decided on the following and any and all comments from seasoned/experienced flyers is greatly welcomed.
FRAME: Tarot Iron Man F680 PRO
FC: DJI NAZA M v2 with GPS and iOSDmini
Tx/Rx: Futaba T14SG and R7008SB
MOTORS: Tarot 4006 620KV
ESC: ZTW Spider Series 30A OPTO (undecided yet on getting RangeVideo's SimonK flashed ones or originals - someone please convince me which way!)
PROPs: RangeVideo 13x5.5 Carbon for when carrying a load / RangeVideo 11x5.5 for no load flying
BATT: 2x RangeVideo RV Power 16000mAh 4S1P 15/30C LiPo
vTx/vRx: ImmersionRC 5.8GHz 600mw transmitter / BlackPearl 7" LCD (RangeVideo) (will get goggles later)
GIMBAL: DYS 3 Axis GoPro with AlexMos controller / gimbal for NEX undecided at this stage, possibly DYS one with an upgrade to the 32bit AlexMos controller
Attached are my ecalc calculations under various loads/battery configs
View attachment 18782View attachment 18783View attachment 18784View attachment 18785View attachment 18786View attachment 18787
Thanks for your time and feedback, it will be much appreciated.
So ive just bought a second hand Blade 350 QX to learn to fly multirotors, but have been spending a lot of time researching and coming up with my first DIY build.
I'm looking at a hex and something that is a good starting platform for aerial filming and fpv. I plan to start with using a GoPro and move up to the likes of a Sony NEX.
So ive decided on the following and any and all comments from seasoned/experienced flyers is greatly welcomed.
FRAME: Tarot Iron Man F680 PRO
FC: DJI NAZA M v2 with GPS and iOSDmini
Tx/Rx: Futaba T14SG and R7008SB
MOTORS: Tarot 4006 620KV
ESC: ZTW Spider Series 30A OPTO (undecided yet on getting RangeVideo's SimonK flashed ones or originals - someone please convince me which way!)
PROPs: RangeVideo 13x5.5 Carbon for when carrying a load / RangeVideo 11x5.5 for no load flying
BATT: 2x RangeVideo RV Power 16000mAh 4S1P 15/30C LiPo
vTx/vRx: ImmersionRC 5.8GHz 600mw transmitter / BlackPearl 7" LCD (RangeVideo) (will get goggles later)
GIMBAL: DYS 3 Axis GoPro with AlexMos controller / gimbal for NEX undecided at this stage, possibly DYS one with an upgrade to the 32bit AlexMos controller
Attached are my ecalc calculations under various loads/battery configs
View attachment 18782View attachment 18783View attachment 18784View attachment 18785View attachment 18786View attachment 18787
Thanks for your time and feedback, it will be much appreciated.
Attachments
-
eCalc - T680Pro_2batt_NoLoad.pdf346.4 KB · Views: 609
-
eCalc - T680Pro_2batt_NEX_MaxLoad.pdf346.4 KB · Views: 861
-
eCalc - T680Pro_2batt_GoPro.pdf346.4 KB · Views: 722
-
eCalc - T680Pro_1batt_NoLoad_11prop.pdf325.5 KB · Views: 561
-
eCalc - T680Pro_1batt_NoLoad.pdf344 KB · Views: 659
-
eCalc - T680Pro_1batt_GoPro.pdf344.1 KB · Views: 509
Last edited by a moderator: