Search results

I also use 5.16. Never had any problems with it, it just... Works! :)

I believe the sound you hear from propellers when descending are not the motors that start, it's autorotation that kicks in when the speed get high enough. I have experienced this myself when shutting off motors by mistake. The sound is different when propellers going backwards, and they will...

Any info about price/release date?

I read somewhere about a New Version of the wkm. With aluminium housing? Any info on this?

The safety feature for motor failure on hexa came With Version 5.14. So no problem running 5.16 if you prefer that over 5.20. Release notes for all Versions: http://download.dji-innovations.com/downloads/wkm/en/Wookong_M_product_release_notes_en.pdf

Pssst... Irony! ;)

If there is noe light, either it's not getting correct power or the rx is dead. Are you sure you have not reversed the powerleads? Not sure what type of rx you have, but the D8R is good for 3.5 to 10V, so 7.4V should not have burned it.

You ARE using a FRsky TX module? You can not bind Turnigy transmitter to a FRsky receiver without FRsky TX module...

I actually experienced somthing like this. I have changed ESC's and wanted to stress test them with max load to be sure they don't get too hot. So I added 1kg+ more than I usually carry, total around 6kg. After a while I had to increase throttle to 75% just to keep altitude. I thought it was due...

Thanks. I have flown around 15 battery packs now, everything feels ok. If I should make a comment, it would be that the altitude hold seems to be more dependant on the throttle stick being placed at the exactly right place. But I upgraded from 5.02, so this may have been changed a long time...

Is this DJi' official facebook page? What do they mean with the last video and comment? And where is 5.16, it's not available on their website... http://www.facebook.com/#!/pages/DJI-WOOKONG-M 5.20 problem Advice REMAINING to Version 5.16

I've been using v.5.02 for a year or so now. Never had any problems with it. But I wanted the new redundancy feature that DJi included in the firmware from v.5.16, in case a prop or motor breaks on my hex, so I upgraded to 5.20 now. I've started testing, everything works great with the same...

I suspect a false positive from your antivirus. The webpage did not trigger any of these 31 antivirus services: https://www.virustotal.com/url/fd22c91f38ff388a6f5274bcd6f8b4adfe4810fd8c05d4c3ac616e8726e42eeb/analysis/1353174362/

I'm still on v.5.02 because I hear people having problems with newer versions. Is this GPS problem the cause of all the problems people has experienced with wkm? So if I got the old gps it would be safe to upgrade to the last version? Never had any problems with my wkm running 5.02. Have used...

Something like this: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18987 There are several other versions available.

The voltage protection feature is a total useless function for anything else but experimenting. You do not want the machine to override your controls and make decisions for you! Get yourself a Lipo alarm or telemetry showing battery voltage, so you know when to land.

I really can't say if the reason my wkm equipped machines is still alive is caused by sticking to old firmware, or because I'm very careful with testing, props, motors, soldering etc. I do know that I have all I need for the moment with v.5.02 except the redundancy feature. I'm doing AP missions...

Just remember that the advanced functions, like return to home and poi heading, does not exist in 5.02. You can set up fail safe to return home, but it's not a function that can be activated by a separate switch. The only "advanced" function I have used is the home lock. So I'm able to pull the...

Sure. Install this assistant software and use it to load 5.02 to your wkm. https://dl.dropbox.com/u/19126845/5.02-Wookong-M_Assistant_Software_V1.20.rar

As i'm doing AP work, I can not risk upgrading without spending days and weeks testing the upgrade in open fields. Loosing or crashing my multirotor at work will be very expensive and has the potential to hurt someone. So until the majority reports a new flawless version, I won't upgrade...