Search results

Hi people. I'm being forced on to another type of ESC as my favourite ones have gone end of life. I'm trying a new set of Jeti 40Amp hi-copter ESC's Everything is connected as per usual but the Jeti's / engines are not responding at the same time. Some start some judder. However they all run...

I'm after damaged un reparable DJI Zenmuse Z15 any version will do but idealy nex7 GH2/3 what you have. Parts, motors frames anything. UK location idealy. Must be cheap lol.. all the best

Hi all Does anyone know if the A2 supports the GP-Action settings in the ground station software. Particularly automated shutter release? On the WKM it was the F1 port but can't seem to find which, if any on the A2 many thanks

Hi all. I don't use NAZA's that much but out of the box I have a problem with the LED. Well it's not actually the led its the NAZA itself. I've tried the led on another and it works fine but back on the other NAZA its shows no lights at all. Is it a duff NAZA? If anyone else has had this please...

I'm setting poi during flight. But want to do another poi in the same flight but when I switch poi off then reset the new poi position and re-engage poi it points back to the original poi. Is it possible to do more in a single flight rather than landing and rebooting the wookong? Many thanks...

The new Droidworx Titanium QR series (Ti-QR) is now available for pre order. Details of the new features can be downloaded by clicking the Ti-QR banner at www.multirotorcraft.co.uk We are also pleased to introduce the all new retro pocket rocket called "BOT"and the new Skyjib Super 6. Our site...

DJI has continued improving the Naza Flight Controller, the latest is the Naza M V2 which is the next exciting product to the market with the latest technology being integrated in to the new NAZA M V2. The basic functionality will remain the same as DJI NAZA V1, however there are a few new...

Spring Sale:- I am clearing a few Droidworx frames along with a few other bits. Hope you find something of interest. Droidworx XM8 Extended was £1140 now £995 (1 Available) http://www.multirotorcraft.co.uk/#/shop/4567294934/Droidworx-XM8-Extended/3632070 Drioidworx XM4 was £995 now £895 (1...

I have recently purchased a new Zenmuse Z15N. I have shutter working but can't seem to make the start stop for video to work. The HDMI board is supposed to be V2 but looking at it, the board says HDMI to AV V4. I have also checked the Zenmuse software to see the the AUX3 switch is working and...

Has anyone tried to use the freefly HDMI converter with the DJI iOSD? Do I need to take the output from the freefly converter to the av in on the iOSD, then out to the Video Tx or can I just splice the iOSD av out straight into the video Tx along with the output from the HDMI converter. I've...

Hi All I have eight AXI Droidworx Edition 2814/22 almost new boxed with prop adaptor. They have only had a few light flights never overloaded and were swapped out for larger motors. May have residue of thread lock and or handling marks plus the leads are minus about an inch. £50 each and...

Hi all i am running a New years eve promotion on my last few Droidworx XM Series stock and Photohigher AV130 camera mounts. £100 refund on all Droidworx XM series Airframes and £50 refund off Photohigher AV130 Camera mounts (All Silver in colour) Valid until the 2nd of January 2013 or while...

Just to let you all know that I now have the Droidworx XM Series in stock XM4, XM6, with Extended Landing Gear XM8 Extended Droidworx Power distribution boards So if you fancy one of the fantastic frames head over to www.multirotorcraft.com all with free UK shipping. All the best Andrew

Hi All I have a bit of a head scratcher here. I have built an AD6HLE complete with the Photohigher 360 Pan kit. Two man crew. The AD6HLE has Wookong M Spektrum RC, DX8 & AR8000, AXI 2814/22's and 40AMP ESC. The 360 lower half is AV200 with the Photohigher 360 Pan kit and legs. It also has...

Hi All If you fancy adding an AV130 or AV200 to your Droidworx build I have a special price on my last two stock camera mounts before the next batch is in. AV200 latest version £729.99 and AV130 at £629.99 some reduction on Droidworx Edition 2217/20 and 2814/22 as well.. You can PM me or...

I would like to try out the MK board with all features, GPS, follow me + power distribution. Can someone let me have a list of whats needed as I am finding the options a bit confusing. Many thanks in anticipation Regards Andrew

I just wanted to let you know of a Possible bug in Wookong 5.06 that could cause inguriy if props are on... I have found that if you execute CSC and lift the throttle a little then shutdown the throttle stick to 0% and allow the engines to stop, if you lift the throtle stick within 5...

I am selling a newish DJI Flame Wheel F330. It is as standard complete with with 4 x DJI 2212 Motors 4 x 18A OPTO ESC 8" Props and NAZA flight controller. All built just add Rx Tx and Lipo. Its in lovely as new condition. I am collecting funds for a SkyJib 6 I am asking £270 ono Many thanks...

I am selling the following if anyone is interested. 1 x Photohigher CX3 2 Axis Camera mount for the latest CX-4 £270 comers with CX-4 MK1 and MKII mounting brackets SOLD 1 x Photohigher CX1 180 Tilt mount for CX-4 £165.00 (GoPro Only) 4 x Torxpower 2216 motors £20 each. SOLD I am moving to a...

Hi All Has anyone got any experience with Hobbywing Funfly 25A ESC and the Wookong. Are they compatible? I appreciate that they have a BEC so the red wire will be removed. Any suggestions / comments on these or recommendations on a tried and test setup would be appreciated. Many thanks