Search results

Thanks Joe. So good to hear those reassuring news. What are you flying your Zenmuse with? I would like to fly it with my Cinestar-8, but I haven't found a suitable adapter for mounting Zenmuse into CS. Does anyone know if such a treat is available?

So you mean with 6s setup KW9 would be better and with my current 5s setup KW8 would be better? I have invested a lot into 5s batteries, so naturally I would like to use them.

That´s what I thought. I hope I can use the lens hood too. Will be seen.

Hi I am going to build a copter with the new Zenmuse Z15-5D gimbal and Vulcan UAV octo frame. There are two reasons for frame selection: A. S1000 is not available yet B. S800 was bad at beginning and it is possible that S1000 might be as well. Vulcan on the other hand seems to have really good...

Upon reading the gimbal manual I found out that DJI says not to use filter and/or lens hood on the lens. Additionally DJI recommends only to use SD card on the Mark III, not CF card because of balance. This is not good for serious aerial cinematography. It is necessary to use ND filters on the...

I am too considering to buy this gimbal. Waiting your opinions with excitement Joe! Some questions as I am a Zenmuse newbie. 1. Can I install a ND filter and a lens hood to the lens or does it affect the balance of the gimbal too much? In DJI:s pictures there is no lens hood. Not sure about...

Sold. Thanks.

Airpix is an aerial cinematography firm founded by two Finnish cinematographers. We are based in Helsinki, Finland. We have extensive academic and practical background in the art of cinematography. We are working film professionals so we can also provide you with traditional cinematography and...

I am selling this because my RED gimbal needs a belt reduction system. This should be fine for smaller cameras. Tested and flown twice. Like new. USD 225 shipped anywhere in the world. Payment by Paypal. Located in Finland. Item link...

There is post stabilisation. You can easily see it when the balcony "jumps" at you for example. I say this because I don´t want potential RSGS buyers to think one gets this good results with it. There are far better and cheaper systems out there like Alexmos.

Selling my AV130 with 360pan and RSGS for 300$ plus shipping. Purchased in Jan-Feb 2013. Used very little. Ship globally. Cheapest safe shipping option used. tuukka.heikki (at) gmail.com. Gimbal is in Finland.

Well it seems as PH has given up altogether trying to make Skyline work. No input on this forum, no new official firmware, no reply to the mails besides the only exception of Sue who tries to help but she is not a tech support person. I wish PH all the best in the future. They really need it if...

Here are the pictures. Enjoy!

Selling AV130+360pan+Skyline v.1.2 ship globally 600€+shipping I am selling my AV130 gimbal with 360 pan and Skyline RSGS v.1.2 for 600€ plus shipping. Some spares for the gimbal are included. All are brand new, max. five configuration flights on them and in mint condition. Received the items...

Selling my AV130 gimbal with 360 pan and Skyline RSGS v.1.2 for 600€ plus shipping. Some spares for the gimbal are included. All are brand new, max. five configuration flights on them. Received the items on Feb. 2013. Will ship globally. PM me if interested. Selling post here...

Has anyone had the problem I describe two posts above? Maybe I should try 1.2.2 again.

About tuning: When I tune the gimbal with the TX off, it goes fine. And after re-boot, still the TX off, the gimbal works. Horizon is on level etc. BUT When I turn the TX on, the gimbal goes haywire. When I switch the AUX to auto stab or to stab with stick inputs position, the horizon is...

Was somebody suggesting earlier in the thread to use Freefly servo on the pan of AV200 to make it work better? This is not possible with AV130 as it has a midi sized servo and Freefly servos are normal sized. Any alternatives? My pan servo is working badly even after a lot of tweaking.

Managed to get the pan center tune into -170 but once pan stabilization was activated, the pan started to turn around very rapidly regardless. Found a solution: The pan servo has to be REVERSED in the software. This way I managed to get the rotation stop and the pan stays still. Naturally the...

Hi Back to tuning Skyline after doing the same with Radians and Freefly 3-axis gimbal. Exprience with Radians was at least three times better justifying three times the price. Problem: Pan center tune is good at -170. When I dial this in and save settings to flash, disconnect, boot Skyline...