Search results

  1. kloner

    Xoar 3 blade wood props

    I just followed a thread to a guys shop the other day form here that had em for i thought half that.......... bartman was on the thread, was titled something about motor efficiency. had motors on scales with different props and the findings
  2. kloner

    TBS Discovery, FPV Quadro from Team Blacksheep based on DJI Parts

    i thought he was asking how long till we can throw down our money and get one? Trappy keeps saying cheap, any idea how cheap?
  3. kloner

    Lipo Warning - Scary

    nothing puts it out, just puts out what they light. there like solid fuel rocket motors, burn till there outta fuel. Co2 is the cleanest I've heard of alot of cinder blocks and metal cans as being alot of folks way of storing/transporting. i personaly just let em ride and never hang onto...
  4. kloner

    Is it really a good idea to mount the FPV camera on a stabilized gimbal?

    what about an artificial horizon?
  5. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    after you've seen that shutting it off makes failsafe kick in naza, make sure to go back over your gear channel and make that subtrim to right in the middle of arming each mode like you noted, go more than one click in though. mine stays there i think was 5 clicks as your trimming through, if is...
  6. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    Plug everything into naza assistant, goto the calibration screen. make your failsafe come on and move the throttle to over 10%, i use 40% and have hit it alot, never lost anything....... shut it all down. put the bind plug into the ar8000, boot it up, should blink. now remove the bind plug...
  7. kloner

    Is it really a good idea to mount the FPV camera on a stabilized gimbal?

    i'm gonna do what he said on mine, when i tilt forward to go places all i see is the ground, the upper corners show fisheye of the sky,,,,,, sucks. Roll doesn't seem like something i want
  8. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    yea, it could, but it should be an orange flashing light is there any errors flashing in the naza assistant when you plug it in and turn it all on? While your in there, count how many clicks the manual and atti stays on and go back half as many clicks, that'll put ya in the middle is your rx...
  9. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    i dont think its in the sky flashing red light is low voltage/other errors according to the manual
  10. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    m1-m6 forward, receiver wires out the back
  11. kloner

    Lipo Warning - Scary

    yea but nimh or nicd just get hot, wires melt, cells pop. lipos start this polymer smoke bomb fire that is unmistakable. smoke turns into what looks like welding, then the next cell lights. I crashes a 12s heli in my driveway. broke a velcro strap and slung a 6s 5000 into the path of the blade...
  12. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    what about the naza? it has to be one piece of tape and the controller, no lifted on velcro crap. it can't move from the frame, has to be rock solid. the imu on the naza aint good either
  13. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    failsafes not coming on. You want to see that with it hooked up to the assistant program. your just seeing your standard bottom throttle bind. if you don't dind it with how i said, you get the standard spektrum failsafe which is the throttle where you had it set when you bound and the rest where...
  14. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    need to move the stuff around. most importantly get the naza down solid if your still trying to fly this thing. dunno if you've ever seen a gyro off it's mount and what it'll do, but yea, that thing will slice you open worse than it has if you let it. the imu is a dirty little pig. If your rx...
  15. kloner

    Monitor the Go Pro baterry voltage?

    yea, whatever you put in comes out the 4 ports, makes adding changing cameras a piece of cake, like plugging in a servo. i had to send a seperate 5v off the rc bec to one cam, the gopros powered by itself and the other 2 cams are 12v. just woulda been cleaner, like tbs core
  16. kloner

    Monitor the Go Pro baterry voltage?

    i've got the 4 channel version of that switch, nice unit, works killer, but is 5v or 12v. wish it fed both at the same time
  17. kloner

    14 Stiches later, I think something is wrong with my DJI 450 Naza...

    it acts like it will when your missing a wire to naza from the rx Take the props off, wiggle around your short cables to the naza at it and the rx and see if it arms. Something is way weird Do you have any servos? You might see if the rc system works on all channels moving a servo from ch to...
  18. kloner

    Monitor the Go Pro baterry voltage?

    it is visible in the transmission, but not on the cameras memory card. it's one of them bars, has three levels of charged or not I've seen breakout boards that go into the cameras expansion port that you can tap into anything...
  19. kloner

    GoPro Hero2 FPV video-out problem when in timelapse mode???

    if it's within the warranty, they'll take care of ya. sucks for now though, i'm sure. Should start the process now on there site. Takes a day or two between replies. sounds defective
  20. kloner

    Lipo Warning - Scary

    even the best get caught by this and don't react right. while back Curtis Yougblood was flying at his shop like any other day and was charging inside when he heard the same thing you did. Freaked out, grabbed the battery and threw it outside. Wound up in the burn unit with either 2nd or 3rd...
Top