Search results

the 2216 arent 16x19 mount holes, there the 25x19. which still lineup two of the 4 mount holes but aren't a "natural fit"

i have there 7 and 9 channel rx's i didn't say bind it, said to put the bind plug into the port and power it up, if nothing flashes your doa. if it does flash, bind it to the radio and keep going. the bind plug forces it to flash, unlike powering it up unbound which it will never flash without...

more than a week charged at room temp makes damage, not alot but it starts making the internal resistance go up. if you have a high end charger, they have "special modes" and there is usually an internal resistance test you can do. if not, you really want to get a cell checker that has the IR...

yep on the esc red wire part......... you also didn't want to cut it, next time unclip and fold it back, makes it easier to put back. the dji kit plugs together as supplied, and you can't have something not plugged in or upside down to "try"

I hit f8 when my vista machine was booting up and it has safe mode options. might take a look just in case it's a bunch of failed driver instalations hanging ya. wasn't there something in the post that said you had problems installing the software part of the driver? so your saying that with...

http://www.altitudehobbies.com/brushless-motors/peak-suppo-motors/brushless-motor-peak-400-28-30-1000kv-suppo-2212-13 http://www.altitudehobbies.com/brushless-motors/cobra-motors/cobra-c-2213-26-brushless-motor-950kv-park-400-equiv on 4s http://www.rctigermotor.com/show.php?contentid=145

yes....... but the bearing is gonna get worse and worse till even the right props wont make it happy

depending on weight would depend what size i'd get. but i'm with killby on the built in hub thing, lack of availability for parts and the $32 price tag. There generaly user unfriendly as a hobby grade part. i've had really good luck with suppo brand motors like at altitude hobby and have seen...

yes, the bearing going out prevents the motor from hitting the rpm the controllers trying to put it...... it happens. are these the 2212? i remember mine are different. got mine at boca, motors have ran 300-400 flights and are still smooth, still running on my 2nd quad. think i went with some...

plug it in with a bind plug and nothing happens, i'd guess doa. Is the sat dsm2? if you have a servo, might see if you can make work normal or heck, power it up with a bind plug and nothing but power going into it to see if it's really doa

sounds like the loading for the props is just too low and they aren't spinning enough at a hover..... what does it weight? what battery? recovering from crashes is tough but doable. could be like a bearing thats only damaged enough to show this now. are the props side to side balanced or just...

you just slide a xacto knife/needle, something really small that can get under the plastic tag into the little clip on the connector and slide the wire out........ then slide it back into the right orientation if you dont see the s molded into the case, look again