Search results

got all the wiring done, got the new antenna made, think i'm about ready to give this thing a try. wired up the fpv gear on a seperate battery for now, will be fine the next few weeks. Can figure out these new to me motors, the props, etc. Weighed in at 1540g. rtf with 3000 4s for power, 1000...

found this

same resolution so at the end of the day it's the same recording. This one has an internal battery so when it powers down, it closes out the file no matter if you just unplug power or switch it off, record auto when power applied, all configurable. but that one shows needing a battery, i'd...

an easier way to record is like a memory card recorder like this. one side affect is if you use it inline with your monitor, it always feeds the monitor so if it has a blue screen when the signal sucks, this keeps it from happening feeding static. you can usually still make stuff out in static...

this sounds like an esc failing. I'd replace the esc on the number 3 and try again....... i had a new hobbywing 18 amp do the same exact thing, replaced and never happened again. If you don't have or can't, try moving the #3 esc to another motor and see if it does it to that prop I finally was...

that's what sold me on the FT, figured it was worth $30 for the hood alone even if i have to throw away the screen When the ad says 1440 X 234, what is that? it doesn't look 7:1 ratio, what is that interpreted to?

no, you just point it the direction your gonna fly, it'll go miles that way, 40-60 degree beam depending what size the reflector is (db gain). my 5.8 was doing 1000 feet to the sides and at least at least 600 feet behind it. and when it got to those areas, i was noticing a slight loss of...

absolutely correct. just like a plane is done. DJI props are not always balanced, in fact aren't but they got that keyway in the hub that makes it hard to do so. APC are easier to do, but aren't very close from the factory, Grapner are really close from the factory. It makes the craft fly...

i just upgraded mine and don't have the gps. did you guys reset everything in assistant? re-calibrate, re-check that what used to be atti mode isn't going straight into gps mode or failsafe. that is totaly different now and has to be reset

Sup, welcome nice rig and i concour. whats the little rubber duck antenna on the back doing?

made it a mile on 5.8 and it never waivered. that crosshair is the bomb it penetrated so good had me second guessing changing over

5.8 doesn't even work without em there really simple to make, the rg316 cable is about a buck a foot, the connectors are about a buck a piece on ebay and the welding wire is cheap. even better a set of guitar strings. 5.8 use really thin wire, 900 use really thick wire. rcg and fpvlab have...

I ordered one of them foxtech monitors. haven't got it yet, but will be here shortly http://www.foxtechfpv.com/foxtech-m700-7-monitor-p-575.html

this one is pretty good http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHY61

looks like a new one bought today ships in a week, same as you guys. heres what i was left with. still flies, just no core power to the cameras. Core is smoked, frames got a hole in it

then

he posted this yesterday I just took mine outside and hovered i for the first time. Flew awesome. when i was done went into the house, noticed smoke, couldn't get the battery undone fast enough, smoked the core. i gotta guess a piece of solder got loose in there. What a mess that is to do...

the 330 flamewheel is a pretty good deal for something like this. little twitchy but not bad. the 450 is alot more tame but kinda starts to be big

that's pretty cool. there an hour away from me

the apc come with adapters to slide right on. there a better prop than the dji