Search results

Sold

the rpm is all about what props we got to work with. some folks like the 760kv with 10" props and 4s, other guys are going with 1200-1300kv motors, 8" props and 3s. 900-1000kv can do 10" on 3s and 8or 9" with 4s easily, even the stock motors any electrical motor has a max watts. while some...

mine musta got swiped........

most of the multi specialty shops have em like gothelirc or addictiverc, v-east is the main graupner shop http://www.addictiverc.com/ http://gothelirc.com/ http://www.v-eastonline.com/categories/Graupner-Prop-Shop/Graupner-E%252dProps/ astroboy, how much does your multi weigh?

it comes with 14 gauge. i use some car stuff from the LHS that's ...... says novak, looks at least a gauge or two thicker, i'd bet it's 12g.

I've got an assortment of dji f450 stuff for sale. Guess the arms are also f550 sized. included is 1 new DJI flame wheel f450 frame plate set 1 used clone f450 frame plate set 1 used DJI top plate 2 new white arms 2 used white arms, no breaks 1 dji parts bag minus the bolts. has velcro...

mines just got a red and black wire. got it two weeks ago

I believe there a fixed calibration type that doesn't need it. is your naza calibrated right? if there is throttle trim on the throttle stick, make sure it is centered and when you calibrate it, move the screen to show where the throttle stick is and when it is at 50% so when you click finish...

Flown 10 packs now, fallin in love with the way she feels. I've had longer than wide fpv quads before, but this wide shrt thing feels good. Everything i've tried so far it does. getting the gains dialed in a bit better. the 8" props got it all loose in the yaw but with the gains up around...

on a f450 the 3s 4000-4400 or 4s in 3000 are great choices. 5000mah packs start needing 10" props to carry, adding a go pro starts taxing the power it comes with, etc. Next thing your like me, everything you bought to start is on a shelf and your in deep my favorite batteries in order are...

welcome. the newest dji 450 kits have the wire now for the power lead, just need the plug your going with

for the hot motor look at the prop and it's balance. if it has crashed, look at a bent motor, just replace it if keeps happening, not too expensive for the slowing it down part, look at dual rates and expo in your manual. spektrum you would add + expo to slow it down. for even more, decrease...

no, you would switch models in your radio and the bind would be remembered. most radios have 10-50 model memory, you use that

thanks. yes there the 2810, so far really happy with them, they have a more stock feeling to them but are doing it without breaking a sweat. 8x5 are so easy to "do" scotchbrighted them with the red stuff, hit em with a coat of self etching primer then hit them with PlastiDip in the spray can...

I've flown naza since december, own three of em and never seen this Are you flying in gps mode without a gps lock? if it's that dangerous, call your dealer

the live feed capture. i used to try this with my 5.8 and it'd go blank down there. I've never been around the corner. i got a 1/4 mile of the San Diego river running across my property. when i know it works, i'll try and fly it. this is without a tracker. the 5.8 did alot less junk to the sides...

on the how to change the channel bit, i used a ball point pen. makes a line, but the pen slides the switch without breaking the seal, stretches a little. i use ch4, 5800mhz

it's something your consistently doingwrong most likely if you want to see what it's got in it, hook it up totaly by itself and go check it out. vtx, cam and a battery, walk around, move stuff, etc. Is all the problems on the ground on but not flying? have you tried hovering and seeing what it...

show me some pictures of how it's laid out. You should be able to get a long ways away with what you got. usually it is interference but them stock antennas suck hard. You need some rhcp type. if you want a discount style set that work, lmk. All the fpv videos i did last weekend was with the...

8mm