Search results

looks like 2 stators, 1 bell and one of them spacers that goes on the bottom of the shaft and 4 spare spacers for 2212 on 330 arms

it likes 8" props on 3s like 1500-2200mah packs. the 9" gws are about like the 8x5 graup. think theres a apc option too those are dsm2 sats. i'll throw in a hobbyking 9 ch rx that has dual sat inputs and sbus out.......... it is also dsm2/spektrum the esc's all only have an hour, all stock...

see this? http://fpvlab.com/forums/showthread.php?6746-OSD-for-NAZA-with-GPS

the difference is the power and the filters inside. the filters inside are like the ones in immersion gear. the power difference is 1.2 watts, that is huge, 300mw versus 1.5 watts of the dirtiest nastiest video signal there is. Same brand hobbyking sells.......... the same brand receiver is...

that is cool

yea, your gonna want to get the cg consistent. i do velcro straps and i always line up a common thing like arm bolt X or whatever. cg doesn't matter to hover, but as soon as you do forward flight it's all about cg. in general you want the cg back a little bit for forward flight........ nose...

make a video, lets see what it does

this is the oil the main US Cobra importer sells http://www.innov8tivedesigns.com/product_info.php?cPath=70&products_id=372 it's not needed till the grease starts wearing off, it'll extend the life, you'll see it in heat first, drop of oil heat goes away

will do,,,, i'm planning a day trip this weekend down to the desert to fly yea, my boat was going through oil over the 4th weekend and it was 116. the sweat was running in my eyes so fast everytime i tried looking at it i just drug it 200 miles to do it in San Diego to fix it. Think a valve...

put a black wrapper over the ezuhf too. All that's left is get this moved to the good frame, get the real cam mounted and working and loom all the wires. everythings lengths have already been changed, after the gps works i'll trim that one down. I think i'm gonna paint my gopro floro...

that was a good call. i think next i'll try straight in front of the front of the battery bolts, looks will sit with a mounting of x=0 y=0 z=3,,,,,,,, wonder how it's gonna deal with that crazy 1.3 cloverleaf

gulp, what a vid....... that sucks

the size is the biggest problem. y ou need room to seperate it all out. you want this one http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_30_38&products_id=1016 or even this one...

earlier i had it between the s and c in discovery but on the pole. i was kinda worried about the video gear but will give it a try on the floor there. i'm down with keepin it clean

that's what i'm asking for,,,,,,,, mine is coming too. can't wait to have it right I'll fly it tomorrow and see how it works there

this is an interference thing. the 1500mw vtx is the last thing you needed on there. The new 1258 300mw is the one you needed for close quarters and it's lawmate, not this one. i have this vtx but it had to go on my zeph and will do great at 5 miles out, but your not gonna get that far away...

good, cause this thing looks like crap on a stick.......... wheres your vu mounted at?

I've got a dji f330 frame, 3 hobbywing 18 amp and 3 rctimer 18 amp esc's along with 4 dji 2215 motors. it all still flies good. the esc mismatch doesn't have any affect on it flying, flew great with naza but it's in a new home so this thing is collecting dust. frame is clean, 2 of the esc's are...

it could be as simple as the motors wanting oil to the props being out of balance. anything little the craft has a hard time making the motors do everything perfect. One thing i've noticed is the more available power the better. 28mm motors or more should be the minimum to do much more than...

got one of these today...... other than the $ems only shipping, it was a pretty good deal. The picture is super clear, reminds me of looking through goggles being the 22" monitor is a little rough being 640x480 resolution and so big. This one is 800x600 and 1/3 the size. Anyway, colors are true...