Search results

  1. kloner

    travel cases

    if you wanted to run 2 transmitters into one craft via lrs, that's the way to do it. other than that, it's alright, one more piece of ground equipment that needed a battery and a tripod. to me, it's alot more convienant to have it all in your hand, especially now DL has the power output...
  2. kloner

    Super-size my F550

    you need something like this http://aerialmediapros.com/store/index.php?cPath=25_36 but yeah adding weight is gonna eat flight times
  3. kloner

    Telink Multifun

    So i bought my daughter a rmrc sky surfer, built it all up with eagle tree osd pro, RTH, etc. took it outside with her, tossed it up and it flew great, but my wife was calling off rssi and it was crap, 53, 10, 90, i was like wtf. tried bringing it down my runway (driveway) and came in a little...
  4. kloner

    travel cases

    no, i finally bought a futaba. was pretty much using it to get around the jr/dragonlink incompatibility part. problem is you get one failsafe, one model match, etc. probably the biggest downside is the lack of the ability to slightly move the antennas angle for better signal like when it's all...
  5. kloner

    travel cases

    yea, wanted more than just text by the handle to recognize em.
  6. kloner

    travel cases

    thanks heres how the cases came out
  7. kloner

    Multiple Naza-powered Multis - Programming Question

    sidney does over at rcgroups i had three of em here at one point, each one had it's own settings, all you do is plug it in and wala
  8. kloner

    Motor vibrating but not turning, is it dead?

    if you unplug and replug, it might fire back up. alot of times it's like he mentioned a crappy solder joint, but others it's just one of those things that metal to metal stops making connection and just needs to be touched. do one at a time cause switching them around will change a motors spin...
  9. kloner

    Multiple Naza-powered Multis - Programming Question

    yep, each one has it's own serial number like when you register the first time. it's a non issue
  10. kloner

    calling all Kloners, calling all Kloners.........FPV Q

    the 433 link is so superior it'll have you wanting to switch everything over. it doesn't glitch like 72 did back in the day. then it lets you use the best frequency for video, 2.4. that's what trappy ran in them videos you posted
  11. kloner

    second axi 2814/22 which is weird (the vid)

    you got me, that things messed up
  12. kloner

    calling all Kloners, calling all Kloners.........FPV Q

    yes you can use the gopro only and not have any trouble with orientation. if you get something like Eagle Tree OSD pro and the guardian, it has a artificial horizon. the dragonlink osd too, they have waypoints to target, return to home, ET has stabilization yes, easily. could do that with the...
  13. kloner

    second axi 2814/22 which is weird (the vid)

    wow is it the bearing? if you hold under it and spin does it feel rough?
  14. kloner

    F450 Motors still getting hot

    if your filming, there a waste of time to perfect, there hard on your equipment because of it. There not worth the money, props that work cost more than $2, they cost at least $3 for apc's. The gemfan hubs are small, plastic is ok, balance isn't there. To use these is pretty much the same as...
  15. kloner

    NAZA rapid flashing red + LOW-VOL[4] error in assistant with a fully loaded LIPO !

    your battery voltage is dropping lower than expected levels. might be a low c rated battery (25c or lower) or it's damaged from the shelf (seen that alot with big brands) to where the IR has damage. To fly with the voltage cuttof enabled means you need to keep dropping those voltages in the...
  16. kloner

    Gimbal Jitters.

    gotcha. got mine decent enough to try. forgot i have a set of brushless cyclics for a scale model, might have to try one out. not much faster, but i think the brushless have a smoother movent. this was with the gain at 14, now i got it down to 12, still gotta try it. Been busy potty training a 2...
  17. kloner

    F450 Motors still getting hot

    that's what i'd try one other thing, stay away from gemfan and try using either apc or graupner. Trappy has the 9" graups, ship from Germany,,,,,, there pretty fast to restock, or at least tells you when you ask. http://www.team-blacksheep.com/products/product:122 when you got all four...
  18. kloner

    2 VTX with Futaba 8fg

    100-300mw would be perfect. on 1.2 or 1.3 i'd just use the rubber duck antennas since everything CP is massive at that range, like 5" across........ but the 5.8, any 5.8 needs it to have half a chance. in your case i'd look at the immersion cp antenna set. there closed off, will totally work at...
  19. kloner

    Which way to the red arms point?

    when i first got my rig and was getting used to it, the arms color didn't mean squat as soon as it was more than 40-50feet away, the whole thing was black and a silouette. Best bang for your money up there is lights, and red lights are the easiest to see out of yellow, blue, white, UV purple...
  20. kloner

    Gimbal Jitters.

    if i understand all this right, it just needs a little more gain to get it to keep up with the craft?
Top