Search results

graupners in the states can be had from most MR specialty shops online. addictive, gothelirc, etc. v-east is graupner usa, they charge a $5 handling fee and only ship ups, seems like my shipping from there is usually $20+ for a set of prop and adapters. the deal of the century is here...

I think what were seeing here is the craft is made to be flown as is out of the box. then guys hang gopros, bigger packs, etc and it quickly over rates the props carrying ability. usually when something is under rated for it's use, it fails. props are a consumable product, like brakes...

i'd steer clear of that thing for what you comment needing, a 200-600mw 5.8 system will do more than you need. if it was me and i didn't want a degree in fpv setup, i'd get the immersion 5.8 system. the power regulator is built in, true plug and play. With one of the other systems you gotta...

pretty cool, love the grass whackin part what osd is that? 1966g aint bad at all for 2814's. i fly my disco 2100+g with 7000-8000mah

i have it as an integrated part of the zephyrs osd pro..... i've had a hard time with the other zephyr, i'm starting to think the dragonlinks the problem after the bixler went like it did then this one. I couldn't get 10 paces, should have seen a hundred paces with the range plug in. I'm...

Send me your address, i'll send ya a set to try

it has major signal loss, the other problem with 5.8. That crosshair needs to be made with a micrometer and the lengths gotta be perfect they kinda just make it tougher to make perfect jello free vids with, little more mass up further from the base

the reliable analog one is this one http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_14&products_id=100 but it's a second or two behind

make us a video of the props spinning. the throttle thing is the backwards motor, that's what they do

you can use a helical and crosshair at the same time with a diversity receiver. Tell foxtech to send ya onecrosshair doesn't have much range if the chopper gets up above or bhind ya without turning it. the helical is like a honey badger, it just don't give a crap, doesn't need to be turned, just...

if i remember right this is a motor spinning backwards, but the props looks like it's right. double check the motor direction in the assistant software where you choose it and make sure there spinning right

tossed this thing up today for a quick buzz......... so the vids start off just a 48" foam plane in light breeze, then around 2:25 i kicked on the guardian and notice how the little girl straightens up and acts like a lady all nice and smooth. i love that guardian thing. There suppose to be...

did mine like this crosshair goes behind stuff better but the helical has range all around it, alot less directional. i like both, but 5.8 and far or low likes that crosshair All this was filmed on 5.8 my last trip to the river. Got there and my 1.3 antenna broke so i switched it back I...

I posted a video of what your link should look like above, the live feed over walters, same exact transmitter you got directional antennas help a ton, but you gotta find the best spots to mount everything to not get interferrence like i showed as well.

on the stock motors you can get away with running them cranked down as long as the big washer is in there. They slip a little in hand, but they fly fine the better way would be to abrasively countersink the nut so it slips down further, like one of these...

I'd make what you have here work first, then decide if it's even for you. might not like it, or you might fall head over heals, in which case things start looking alot cheaper especially when they work ezuhf is $319 with everything you need to plug and play one rig, from there on out it's $119...

trees make it horrible, you'll want to scrape the tops, get down below em and your gonna loose the link 900mhz has the least problem going through stuff, 5.8 is the worst. Complete other end of the spektrum. 2.4 video is best, but you gotta goto 433mhz control like ezuhf

these already have a mast so your good there. What brand are they? different look to em, and really thick wire for 5.8 anything that makes interference is bad. when you talk about frequencies, there wavelengths like if you imagine an ocean swell. it'll peak on each wavelengths center so 433mhz...

last week i got an email from foxtech saying they were shipping out some recal fix something or rather for the v.1 cams at no cost. think it prevented uhf interferrence but don't know what else it was causing. They said v.2 you had to buy it cause the warning was on the site when it was for sale...

one other thing beside the tall mast that gets the antenna away from the vtx is i had to change my channel to get it that good. the stock ch1 didn't work for me. i went to ch4 this was my first try, probably looks familliar then i did the cp antennas on a mast and got this and i took that...