Search results

One of my friends just sent me this link. It is to a write up done by Seabreeze.com. We had recently filmed the SUP Comp for Surftech, and the video has been popping up all over on the internet. We often see Negative write ups in the news. So I thought it was cool to see something with a...

Here is some of our latest work. Completely RAW footage. No post stabilization at all. This was for the Brazilian SUP Team and Surftech Paddle Boards. It was a blast being out there all day. Gosh dang there was talent all around if you know what I mean :) Gimbal is AV200 with Skyline. The...

Hey guys, I thought I would post here, Just in case it turns out to be helpful. Chances are it would get lost quick in the other thread with 100+ pages. Here is a quick test at the shop. It is almost midnight here, so I tried to film next to the only source of Light that I could Find :)...

I get quite a few calls on where to download a certian driver, or a manual for a certian product. I have been working on updating my site with all the latest Downloads for Drivers, Manuals, Softwares ETC. I wanted to have ONE location of all the main downloads, so that my customers and anyone...

Hey guys, I have a couple 14MZ's sitting around and would like to use them with the Futaba. Up until now I have really liked the simplicity of the JR Spektrum sats with the MK board. The Jeti has worked well too. What is the best way to use a newer futaba with the MK FC? I found this SBUS...

Hey guys, long story short. I had 4 of 8 KW8 motors go missing from my shop, along with quite a few Axi 2814's. The axis I am not worried about. They are easily replaced. But the KW8 motors were going on a skyjib that needs to be finished in two weeks for a shoot in Dubai. problem is that...

I have (4) S800 Wookong M Combos available ($2819) . The others, have all been spoken for already. I have 2.4 Data Links available for each of these S800's for $260 each. Purchase a Data Link and you will receive the Single Waypoint Activation for FREE. Forum Members that Purchase the S800...

I was curious if anyone is running 5S lipo's on their S800. I have a bunch of 5S 8000's that are for my sky jib . I was hoping they would be ok for the S800. What would the downside of running 5S on the S800 be? I'm looking forward to see what some of you think about this.

Hey guys, I was getting tired of the inconsistencies in the prop reducers being bought. I also kept noticing they were out of stock everywhere. SoI decided to manufacture our own. Made in the USA. Machined out of 6061 Aluminum, these 8mm-6mmprop reducers are a perfect fit for your Graupner...

I need one motor. Looking for the older version MK 3538 to replace a bad one. Email me pic and price to aerialmediapros@yahoo Thanks, Patrick

I had been talking with Kimberly about a tray for the Red Epic at the NAB show in Vegas. I wanted to get a Tray to support the Epic, along with the fully tested and production model Skyline gyro, built and tested before a large movie shoot taking place this month. Well, it has been a decent...

This is a short intro on the Heavy Lift Conversion Kit from AerialMediaPros.com We have CNC'd and anodized our own Aluminum Motor plates. These are ready to mount your Avroto or AXI 2814 motors. They extend the length of the arm, allowing you to run a 11-12" Prop. With this added power and prop...

Hey guys, I am about to begin testing some Axi and Avroto motors with diffrent prop combination on my F550. I want to monitor the Amps and such, so I can determine the best set up. What would be the best way to record the Amp draw and voltage etc. I was looking at the Turnigy Watt meters, but...

WOWWWWW What a great trip. There was so much to see and do, that I should have stayed at least another day. I spent most of yesterdayin the Droidworx booth, Helping Linda out so she could take a break. That turned out to be amazing, I had a great time chatting with everyone, anda nswering their...

Hey guys, I noticed allot of you are running Graupners on your DJI F550. I am a dealer for them and ZOAR props, and about to place a big order for some 10/5 precision pair props. My questions pertain to the DJI Motor prop shafts. Did you run into any problems mounting your Graupners due to the...

Hey guys, I did a couple nice videos on the DJI F550 BUILD and NAZA CALIBRATIONS. These videos are for anyone looking how to do a complete buid of the DJI F550 NAZA ARF. Also for anyone wanting some step by step details with the NAZA ASSITANT Software, Motor/TX Calibration. The videos are a...

Does anyone know of a good source for motor wire. I would like some decent Silicone 16 awg or 14 awg, Tri colors. Post a link to any source you have. Hobby King seems to always be Out of stock. What size do you reccomend for Axi Motors 2814's etc. I have always used 16 awg in the past.

Recently I have fnished Testing and flying the DJI NAZA F550 ARF. I extremely impressed and excited about this product. I am now recomending it as a trainer, to all our clients buying $10k+ Copters. The Built in Altitude Hold really is sweet. I couldnt believe how well it held its altitude. The...

Hey Guys, I am now supplying Completely Custom Travel Cases for your Multi Rotors. Here is the link in my Vendor Thread for anyone interested, http://www.multirotorforums.com/showthread.php?2434-CUSTOM-TRAVEL-CASES-for-your-MULTI-ROTORS-AVAILABLE&p=25835#post25835

I am having our own custom travel cases manufactured directly for AerialMediaPros.com. I provide these for all our clients builds, and will now be offering them to any one else interested. The current Case measure 38"x38"x7". They are designed for the droidworx AD8 HL frame with 465mm Booms...