Search results

Yes I survived the night ok and finished up with a small pizza and kebab :) they help prevent a mammoth hangover

Here is wishing all the forum members and from all over the globe a very merry christmas and a happy new year and hope you and your loved ones have a really great time. Best wishes from Geoff (Quadcopters Uk)

Good to see you join the forum , they are a good bunch on here from different points on the globe, and all multi rotor enthusiasts so you should get some decent tips and advice. Geoff

Hi Hugh, Basically I would always advise to start off with something cheap to begin with . This way it will give you a insight into the way they fly and also help you learn stick movements and reactions etc . But the problem is the cheaper platforms fly nothing like the higher end systems so...

Hi Dom , Gunter as made his own Distribution setup and on a lovely frame all CNC from scratch , Maybe he has some build pics . I will add a pic below of the sort of ring you can make up which we used on a Cinestar build. Hope they help give you some ideas. Geoff

Hi Steve , Let me know what you need and i will gladly split a pack open for you and let you have what you need. I have plenty Naza kits in stock at the moment. Geoff http://www.quadcopters.co.uk

Hi Ken Looking forward to seeing how you get on with the Data link etc , did you get the click to go upgrade also ?? I have been flying my Naza today and even though i will be classed as biased im loving it :) Geoff

18a are fine with the 2216 Torxpower yes , with the larger motors 3536 Torxpower I would use 30a-40a to be safe. Geoff

Thanks for the Kind words , hope you like the motors .. Im using them all the time and love them .

You still would have had one at some time to bind it :)

I only have the 2.4 version so cant compare sizes sorry , the tx modules are similar length to the PMU but just less than twice as wide so similar size to the MC main controller with a thin single cable antenna about 5" long. The Tx on the copter is powered by the Canbus and the receiver for...

Is the gain moving when you turn the dial ?

Hi Ross , what receiver is yours as I am sure not all Spektrum receivers will hold 2 channel presets for Failsafe .. The more basic ones only remember throttle position like the AR6100 etc . Cheers Geoff

Hi Andy Yes I usually assign one for Pitch and one for Altitude , then when your happy plug into pc again and the settings will show according to dial position. The settings will be pretty much the same for pitch and roll so you can manually type in the same setting for roll as you have for...

Yesterday Quadcopters.co.uk took delivery of the first shipments of WKM View and Click to go and with very limited time I have been working on setting it all up. So far I can say its currently only working on a 32 bit Windows machine , And It is pouring with rain here today so I wont have...

You need to set remote gains on either a slider or a dial , or even a trim switch like on the DX8. Using a 3 way switch will cause the gains to move in relation to the travel assigned to the switch if that makes sense. Geoff

You obviously havent been looking very well then because I have answered loads of questions regarding WKM even to people that have bought elsewhere , You might also remember i made a post on the Droidworx bulletin board asking if any of you guys could recommend a heavy lift set up when we all...

Turnigy , Hobbywing and Himodel escs all work fine with the Wookong try a card programmer to see if anything is different . You may also find if they are not from the same batch they changed the chip in them about a month or so ago and this will cause a start up timing issue.

I think Dave was speaking in jest there Sandor , and for those that know Dave personally will know he has a light hearted sense of humour and there was no hostility at all. However I will speak my mind and say on the subject that I am very disappointed with DJI at the moment because there...

I tried it yesterday and it seemed fine to me :) Was very smooth on lift off and you can now save your configs etc. Geoff Quadcopters