Search results

Yup the flipping over thing has cost me over $100 bucks in one month. I'm not confident to put FPV gear on now which was the whole reason I changed from Heli's to MR's :-/

I needed spacers under mine, some do and some don't :shrug:

This allows you to test your battery packs and see what the actual voltage is reading as well as double as a warning alarm you can hear vs. just a blinking red light. I'm wondering if your low voltage isn't correct in your software or a VU problem. This would be a cheap way to test your cells...

I actually have this mounted on the quad with the Alarm set to my desired voltage warning. It screams! http://www.maxamps.com/LVA-Tester-1-8.htm

Even though the red light is flashing have you verified what the cell voltages are after the 4min?

My understanding is that if your hovering in manual at over mid stick you can prop upsize, if your hovering in manual and under half throttle then you can prop downsize. Feel free to correct me if I'm wrong. With no FPV gear I feel the 10" props are over kill with my 3S packs and affected by...

Shoot within a 60 seconds I have seen somebody go so far it was a spec in the sky. Pretty crazy And it was hard to see through binoculars

Very tempting I always trusted my Futaba 4PKS over all the others and it seems like Futaba is ahead of the game with a better tech moving forward.

I have wanted to try Futaba for flight even though my DX8 hasn't caused any issues but that people rave about Futaba and it's reliability/distance. I ran all Futaba 4PKS Tx's for racing but I hear Futabas Air Tx's are a little more complicated to start with

How's that for a quick response!? :)

I'd send a message to gothelirc, they are great and if possible will let you know right away

Another option http://www.gothelirc.com/shopdisplayproducts.asp?id=148&cat=DJI+Parts%2FUpgrades

Yup

Well I have re-installed everything software/firmware wise & step by step re-set it up and it's not showing the low voltage anymore. Your guess is as good as mine, I emailed L also but haven't heard back so I'll see what he passes along to you. Thanks!

:encouragement:

In the Assistant it stays traditional for the Spektrum AR7010 correct? Just want to make sure I'm not missing anything else being its not S or D-BUS

It will automatically learn where "home" is after grabbing 6 sat signals or 1 or none (I wait until none) red blinking lights for over 6-8 seconds before taking off. When you give throttle it locks home there. With the new firmware you can set a different manual home function but I haven't...

Just make sure your X, Y & Z #'s are good. Mine has had a few bounces or corrections before landing as well Maybe make sure it's got a 10second home lock before lifting off? Not really sure

I'll check that out too but I'm pretty sure it didn't change from my original setting

Nope, when I get time tonight I'll literally go from scratch and redo everything. Oh well, part of the gig sometimes