Recent content by ajwillis303

With mine, the usual process is: Startup sequence ends in 3 green flashes, followed by flashing amber light (calibrating) I've never actually timed it, but varies between 10 seconds and a more usual 45 secs or so. Two things, have you done all the calibrations? including the 'Naza dance'? Also...

Octo eh? Looks like you're going to have plenty of fun calibrating esc's then? Not sure if you're doing this already, but I always unplug the xt connector from the main dist board and hook up any old lipo to power just the M & Rx, 'Safe mode'! Especially with 8 blades, if that thing fires up...

I don't know either, but to be honest, by the time my ezosd has found enough satelites, the Naza is usually flashing green already. THey say it's all to do with temperature/atmospherics. Have you actaully compared two or more identical units together at the same time, side by side as it were...

I'm not saying that this will fix your particular issue, for the reason I gave before, but if you haven't balanced your motors/props, it's worth doing so, and this video is just one way of doing it. You can also use the vibartion meter on a smart phone to do the same thing really. MC's hate...

Is this the Naza v1 with 3,12 firmware? I've seen a few reports out there on the forums suggesting of issues with hexa's. Is this a brand new setup? Also i applied a strip of black tape to each side of the Naza to block out sun light which apparently confuses the barometer. Vibes are a...

Olemil I see you use Futaba gear, as do DJI on their videos. I use Spektrum, and I did notice that after re-calibration following fware update, the elevator stick turned grey afterwards. However, it does arm, so it hasn't actually stopped me doing anything. I'm told the latest has fixed the...

Looks like it will.... Functions:  Manual Mode( user select Manual, Atti and Failsafe);  Atti. Mode;  GpsAtti.Mode;  Intelligent Orientation Control(CF)：Course lock/Home lock;  Enhanced Fail-Safe：Landing / go home & landing;  Quad-rotor I, X; Hex-rotor I, V; Y, IY...

I think that's fair comment. I use the forums for information & friendly advice, but in the end you have to make your own decisions about stuff based on advice received, common sense & gut instinct. ESpecially as DJI themselves demonstrate the failsafe by turning off the transmitter mid...

DJI would be the best people to clarify this, but I know the MK II model has 'MKII' written on the case. I know however in manufacturing, it's not always that cut & dried, as they may have released some MKII's in original cases? I suppose ultimately it doesn't really matter, as long as it...

THat's a big animal you've got there olof. I plan to get all that stuff as soon as the divorce settlement comes thru'.:highly_amused: Andy P.S Lovely 'steady footage' just shows what's possible from 'stock' stuff that wasn't around 10 years ago?

I have the 'mark I' (original) iOSD, and new firmware brings it to the iOSD Mk II level. I've seen a teardown of both the I & II models, If I remember correctly, only difference is a slightly larger internal SD card I think, oh, and a bit of extra shielding here & there..Looks a bit more 'pro'...

Hi hoveringal, yes, it's a big smiley moment when it all works. I have no 'luck' reading the dji manuals (or should I say interpretting), it's all just lost in translations. I must say, I learned a lot from this vid:http://www.youtube.com/watch?v=axp2sdH2fbA, Especially the correct method of...

THanks for that link Charles. It's odd how my Sony SUper HAD board camera doesn't work with my iOSD, I'm really reluctant to part with more cash for another camera if it does not work. Still, if it works with yours. Flying again earlier today, I have 3 X 4 cell 5000 mAh lipo's (2 Turnegy 1...

Hi Charles. SOunds like you're making good progress there. I think it's all possible if you are careful with things, and think them out well first. Having said that, it all changes at the field, when all good common sense and logic turns to mush. I have spent a good deal of time on the sim...

Excuse quality, but: Here you have the 'dremmeled tie bar' & shortened legs. I got a tight fit on the slots, after couple of attempts. Hope it's of use! ATB Andy