Search results

Looking for some S1000 blades in Colorado for pickup tonight. bugilt@gmail.com

Looks like Kyosho zeal gel.

On most routers it's a simple firmware upgrade via the routers firmware upgrade page.

You can get a DD-WRT capable router and turn it into a wifi extender. All of the Linksys routers I have take a 12v transformer. DD-WRT allows you to boost the signal by quite a bit on some models.

It only has one axis of movement. They haven't come out with an Android app for the Bluetooth Led either. It's harder to develop for Android with all the hardware options. Apple will continue to shrink it's market share as long as they are the only one developing hardware for IOS. I have big...

Two totally different things. You will still have to have the larger vehicle to carry a professional camera. It could take the place of your setup in some situations though.

As long as it isn't against a hard edge it should be ok. I have seen people use silicon to insulate the imu on the smaller opening s800 frame.

With the information provided anything is pretty much a guess. What TX/RX are you using?

Yes, you want to let the ESCs and the motors cool down between batteries. Your ESCs should be mounted under the prop wash. If you have a 450 with stock motors and ESCs. You pretty much have to mount them in the right spot.

How long did you allow the esc and motors to cool between batteries? The 10" props are what you want to run with 3s. 4s you want to drop down to the 8".

We had purchased the v1 SE retracts from Secraft in Dec of last year. They worked well until June of this year. They started to have trouble retracting 100%. They would go 80% - 90% of the way up then stop. I took them apart and tried to fix the issue. I didn't see anything of concern, but...

Aerial video of RC racing.

You need to get the new V2 HDMI converter. I have one on my zenmuse gh2 and it has color.

I would expect the weight and lipos to be the issues. I've only see a loss of power like yours when the lipo was bad. Can you tell us a bit about your lipos? C rating, age, cycles, brand, and anything else relevant.

Check your cable then call your dealer. Do you have the stock firmware on your TH9X?

Hobbytown TEOS

You can use a camera to see if the IR light is coming on. I'd also check to make sure it's working with your computer.

Vibrations can cause the behavior you are speaking of. Have you checked prop/motor balance? Is you Naza colliding with anything? How old are your bearings? What kind of climate do you fly in? Can you post a picture of your setup?

It could also be something vibrating against the Naza. I see so many pictures of wires crammed against Naza.

You can turn that off by going to the custom menu and turning off LVF/LCD auto.