Search results

Hi friends - I am thinking about adding the Aerosky X350 Quad to my fleet. I already own and fly other quads and hex's but this X350 looks fun. Currently it links with Droid phones for waypoint flights etc. Does anyone know if they make it compatiable with IOS, will it be a software upgrade or...

Well I did it and bought a $50.00 gimble off of E-Bay - it has two brushless motors and a BGC 2.0 controller. Right out of the box it powers up and slowly starts to point downward. I made sure the go pro was perfectly balanced as the instructions say. I am thinking the board came out of...

Was out flying this weekend the ole Hex Copter using the DJI Woo Kong flight control system with the IOSD and all was well. Flew in ATT mode and started to see a symbol periodically flash near the ATT. The symbol looks like a little guy running... Has anyone else seen this or know what it...

Hi Friends, Using a Run-Cam 600 camera on my Hex connected to a 5.8 transmitter. Everything works fine however I get these weird pixilation images. Anyone know why or how to eliminate this... All connections are good, batteries fresh an will mostly do it when motion is present. Appreciate any...

Hi everyone... Flying the DJI Woo Kong flight controller on a Hex Quad. Flies great so I added the DJI / IOSD. Equally cool but within 1 minute of take off the voltage display (upper left corner) drops from fully charged to 0.03 volts or so.. Of course battery is still strong and flies for...

Hi friends, Just added the Mini IOSD device to my Woo Kong Flame wheel Quad - using a Go-Pro and a 5.8Ghz FPV system. I LOVE it so far BUT the on screen voltage is inaccurate. It starts at 12.5 volts (or so) but within a minute of flying it drops to 0.3 volts. The quad flies for several more...

Hello friends, I purchased a FPV system for my Flame Wheel 450 and am using a Go Pro camera on board. The picture is fantastic and clear but when the quad is 25-30 feet away and further the image blacks out for a split second. Both antenna's are correctly polorized, the FPV runs on a seperate...

After I power up the Woo Kong on my 450 quad and as it searches for sat's, the LED will flash GREEN several times indicating home point has been set, however a few seconds after that it will flash a blue LED. The quad seems to fly OK. The manual states this is :Firmware upgrading is finish. MC...

Hello friends - I have the stock Flame wheel 450 with the Woo Kong guidance system, the Spectrum 2.4 Ghz DX-8 radio and receiver w/telemety, a 5.8Ghz FPV system aboard utilizing a Go Pro camera. She flies great so with the exception of a recent weird incident involving the RTH mode and landing...

Hi friends - a quick intro to what I am running: DJI Woo Kong Controller, Flamewheel 450 (stock motors and ESC), Spectrum DX8, Alware Camera Gimbal and Go-Pro camera. Quad flies well in the yard. When connected to WooKong Assistant 2.0 all values appear correct and functional. PROBLEM: I have my...

Hi friends.. Upgraded to the DX8 and am loving it... Have the telemetry for battery temp, battery voltage and altimeter. The DX8 has multiple screens however is it possible to customize what appears on the screen? I would prefer to have a screen that displays the three telemetry values in larger...

Hi everyone.. UPS will bring me a new DX-8 Wednesday for my Flamewheel 450 with Woo Kong FC. I currently am using the DX-7 and she flies OK. Does this procedure sound correct and do any of you have any recommendations on set up? 01). First connect the AR8000 and telemitry devices together...

Hi Friends - currently flying a fully loaded Flame wheel 450 (CCTV) with the stock DJI 2212-920kv motors. I have a set of Guai 2412-960kv's available too. Would there be any noticable advantages to swapping the 920kv for the larger 960kv motors? The stock DJI 30 Amp ESC's should be able to...

Hello Everyone, I am somewhat new to quads, but not to RC aircraft. I currently am operating a Flamewheel 450 with the stock DJI 30 amp ESC's and stock 2212/920 brushless motors. The props are 10x4.7. The payload consists of an Alware 2 axis Camera Mount, Go Pro Camera, 5.8Mhz transmitter...

Hello everyone - Using a Woo Kong M controller and a Spectrum DX7 on my Flame Wheel 450. Flies great so far. Ran out of 2 or 3 positions switches and was able to assign the "Trainer/Hover Pitch" slider to activate OFF/Course Lock/Home Lock. Question I present is, as the slider advances from Off...

I did it !! I got the nerve and flipped the RTH switch on my flamewheel 450. The Woo Kong controller brought her back home safe and sound. Had a tear in ma eye... Now, let's say while in "returning home mode" I decide to take over - I flip the RTH switch off - what happens if I do not cycle...

Hello everyone.. Just purchased a wireless FPV system from Hobby Wireless in Texas for my Flamewheel 450. I could use some advice on misc voltage issues. I plan on being away from electrical power and will be dependant on using individual Li-Po batteries to power the monitor, transmitter &...

Hello Everyone.. Was curious if anyone know if this is possible.... Using a Spektrum DX7 and currently have my IO (Home Lock / Course Lock) assigned to the hover trim since it is the only switch left available. I suspect using a trim type button to change functions may not be best idea. Would...

Hello everyone - Ijust wanted to update you and say thank you to everyone that replied and helped walk me through the set up of my Woo-Kong Quad Flight System. I drove out to the middle of the desert and let her locate plenty of Sat's. No red LED flashing I waited a few till the LED flashed...

Decided that I enjoy video taping from my quad via the Go-Pro Hero, I wanted to add an FPV system to my Flamewheel 450. I am using a Woo Kong FS, Spectrum 2.4Ghz DX-7 with a 4500mah battery. I decided to get the 5.8Ghz Fat Shark Predator V2 system from Hobby Wireless in Texas. Seems thier shop...