Search results

Hi everybody...I just sold my naza gps. I am that impressed with my APM2.5 . Just make sure you spend the time getting the vibration down going to the APM and all will be good.. I have flown RTL ,loiter, ALT hold and best of all Auto waypoint with auto take off and landing . I now setting up a...

i am using deans connector on battery and 3.5 banana plugs on motors and the rest of loom is soldered.

hi everybody... i have had a similar thing happen . it start when i swapped all my electrics , esc , motors , Naza camera gimbal and servo,s and futaba 2.4RX to a new frame (xaircraft 450 from a x525 which had at least 70- 80 hours flying !). Any i had around 10-15 flights . Then on take off it...

hi ..yes i did calibrate with the card type tool. but i will redo tomorrow ... just a thought could it be due to the battery ? i had a 2200 3s 20c pack on .. cheers

Hi everybody .... i have just finished my scorpion Y650 with Keda 1050kv 9x6 props motors hobbywing 20a esc and Naza controler. a couple of questions : when i start the motors the 2 on the right hand arm need alot more throttle to get moving . any ideas please ? and the other question is : the...

hi everybody ....just a quick note about "goodluckbuy.com" i have read about lots of people having problems them (me included). but for me it all ended up good with replacement turning up . its taken awhile but they sorted it and pointed out the problems that cause the delays . i so pleased...

yes that sounds good . i find the naza really good so a few extra functions would make it great .

hi everybody ... i am flying my quad with a naza fitted ,and very happy with it . just wondering if anyone as any idea if dJi have any add-ons planned for the naza yet ? cheers dazza

thanks for that .i am alway happy to get help and advise from seasoned multi-men like yourself. i have replace with fresh esc and motor and back flying now . cheers

Can a bad motor knock out a esc or can a bad esc break a motor? The motor is 2212 1000kv (not sure make ) and esc is 18a hobbywing funfly. I have tried both with different esc and motors but both broken . Any ideas please ... Cheers darren

great job .. i am very impressed . think i will have a go at your frame too .

thanks for help , the motors are the cheap 2212 1000kv with yellow ends , is it easy to change the shafts (are shafts available ) or is it wiser just to change motor ? cheers darren

hi everybody . everything been working great , since last post . ii have flown about 81/2 hour , and getting abit too cocky. yesterday i flown into the shed doors . anyway today with new props went back out to play . and things are not wright .the quad wants to yaw to the right . it was windy...

hi i would not buy from GLB again . the order came , but quadframe had bits missing , the KK board didnt work right(1 gyro didnt work) and couldnt get the usb programmer to work. told GLB ,they said they would replace KK board , still waiting 3 months on! its a shame as some of there stuff...

thanks for that tomorrow i will look again at voltage monitior.

hi everybody i am getting about 8 minutes flight time on 3s 2200 25c pack . the set up is a quad with 2212 1000kv motors 20a esc on 9x6 props. the naza is on the default voltage monitor setting. does the 8 minutes sound about wright ? and whats the lowest safe voltage monitor setting...

i seam to remember that in the instructions that the rates are set to 100% for both rating settings/ but i think you need to go through instructions as you do have to pay attention while doing software . best of luck

hi since the problem last saturday , i change rx (just to be on safe side) .and rerouted all leads . and have flown about 3hours in total with no problems . i no theys no gps i think the other member who mentioned gps was a little mixed up with the dji systems. as mentioned before my gut...

Hi everybody I don’t mean to tell my grandmother how to suck eggs… Just to let you know about the mod I made to my quadcopter frame , it is a X525 v3 from ebay. Anyway after a couple of hard(ish) landings 1 of the fibreglass feet broke . While looking round my garage for abit of ply wood . I...

hi thanks for reply , but i think were are not talking about the same system , mine is the naza which as on gps .its thse base DJi system . but still , thanks again for taking time to help...