Search results

what makes it boot so atti isn't off kilter and trying to drift off, cause that's what mine does manual is pretty snappy

saw you mention propellers, might take them off till you know all the spinning is right. Can turn it on and touch a motor or spin it down to see it's direction

To the best of my knowledge the idea is if you turn off the tx, it should fall into failsafe. I looked at mine briefly and didn't finish setting it up. Maybe somebody else can chime in on what to do It is super important to make sure the wires from the rx are pointing back on the frame at the...

awesome, your welcome.

those are if you hooked up other channels to the naza, you can adjust the gain like above, but under the number where it says "INH" you drop that down to select x1 or x2, whichever switch you want to control whichever number. I use my extra wires to my osd so mine are inh So your ready to fire...

So i've had a heck of a time understanding balancing and just how balanced is good enough. sure makes a difference in how they fly when you got em absolutely perfect. after this flight i found one more prop that was off just a hair. I spent too much time screwing with these apc props, there not...

that's awesome. i found that if you hold the sticks in any position and hit the atti switch, it locks into that position. guess that made your "not held" hover lock in perfect learn something new every day with this thing

the light is usually from the atti/manual slider not setup yet. it should be on your gear channel, and it shows up on the same screen you changed from dbus to traditional at the bottom. the slider should turn blue under a and under m when the gear switch is flipped.

sat, rx question above?

you didn't mention if the satelite and receiver lights are on IS the sattelite dsmx or dsm2? is the rx dsmx or dsm2?

is the assistant set to tradition on the receiver type? not dbus I've folowed a few of these and never heard of a red light flash,,,, i've seen it when i ran a battery down to far. Is the voltage monitor turned on? if it is, try to dissable it

orange or bright red? Is the light on the rx and sats lit up? Are you absolutely positive the wires are plugged in right as in ground on the right side? grounds (brown wire) is on the top of the naza and rx? If that's really red, is it possible the battery your plugging in is dead?

are you getting some fast yellow lights flashing on the bec? the thing with the led on it?

is there a satelite rx plugged in?

what rx / sat are you using? What does the light on the bec do when you plug in a battery?

sent, thanks. let me know if it didn't give you my address

is the way they setup the gears desireable versus the pulley/belt?

I'll take a set, tell me where to send it. is paypal an option?

in camera setup under "more" has an osd visible option. it's nice it shows the battery life, but is kinda big and in the way if you run osd

Got a reply from gopro support figured i'd share According to them the hero2 has a bug that is showing up like my video above. They said to update to the latest firmware to resolve it.