Search results

agree with everything said.....bought 8 apc props and 4 nice ones with a spare pusher....... on mine, used a stepless step drill in from the front till i knocked the edge off that's too small to fit the big 8mm shaft. it leaves the "precision" hole where the shim goes still from factory. you'll...

my tail wanted to do that too when i had atti up over 100 look at the apc 10x4.7 to get you going, they have regular and pusher in there slofly series The smaller props need 4s to fly

i'm using this one http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHY61 even though i know what tables are level, it doesn't threads so have found it tricky to keep tight when you take it on and off to trim

I got my expo up around 30. it is a preference thing, but makes it easier for me to give it smaller amounts of input around center stick. For me, makes me smoother. some people hate it The settings sound on the higher side......... if you want to try another one, try 130-130-130-100 nd drop...

just so it's on here, the bearings are 4mmx8mmx3mm boca has em in grade 7 i found the shafts in case any of your motors arent as straight as you want it, but you have to trim em down at twistedhobbies.com under 70 gram outrunner replacement shafts. there 4mm and have a c clip groove cut once...

i had similar problems

get yourself a set of nice props on the way and or a few sets of props to break learning to fly if you don't already. a good balancer is a must with the cheaper props. the other main thing to remember is to put the receiver wires on the naza toward the rear, motor/esc wires out the front...

This camera is bolted down tight. one thing i've noticed is once you got everything perfect, it starts getting to the nitty gritty like smooth bearings, oil in them bearings, etc. when you hold the leg and spin the motor, if you can feel it, it's not workin. Thought those props came balanced...

i like jr radios.... the 9503 is nice, but man the 11x is really nice. super high resolution, easy to deal with,programs into anything, super flexible. if you wanted the best of both worlds, hobbyking just released there orange rx for the jr that has sbus. they say it has full range, i've ran...

Man, guess i finally get the prop balancing thing. If anybody's got any gain tuning advice, i'm all ears. Seems like it gets more aileron bobble than elevator, but from the ground, it seems pretty dialed in. This had a little wind up top, was trying to blow it away when i got about half way up...

no preorder, gotta be there when they come in. Your kit sounds weird how it came with them props it did, whered you get the kit? Mine had 6 10x5 props, was a 3s kit If you can find "new version" xaircraft props, they supposedly last. But there still gonna be outta balance bunch of work to make...

there really nice, but i've only seen counter rotating props in bigger sizes, what are you seeing 10x5 in left and right? The site i referenced is usa, you can get whatever shipping "speed" you want, sounded like wednesday, i'll be getting 2 complete sets. I hear ya bro, mine took me about 2...

the apc 10x4.7 are available in left/right,,,,,, there is gws 3 blade in 10x6x3 seem to be about the same bite, the 9x5x3 work good on 4s. there is the graupners but like i said earlier, wont be in till next week. The gaui ones don't fit, too small a hub. ummmmm,,,,,,,,,, i'd wait for the...

That was 1:41 minutes today all on 4s, i have the 3s kit

I've been flip flopping back and forth. The idea is if you give the motors more volts it makes more rpm and you would use smaller props. However with the f450, i've checked it with the eagle tree logger with 10x4.7 apc and i'm drawing 40 amps total, that's 10 amps a motor. Nothing has to be done...

can you work from a 2d .dxf file or does it have to be a 3d autocad type file? what sort of materials do you work with?

makes less obtrusive to the camera, less in frame and looks great I almost went and bought 4 trex tail fins till saw this

and they'll be back in stock next week. i've been hounding them http://www.v-eastonline.com/categories/Graupner-Prop-Shop/Graupner-E%252dProps/ top two sets, two of each

mines a f450 kit. it always needs forward and left input to keep it still I was just looking it over per the other post about making sure the naza sensor is level, mines not, must be my problem, eh? i got a strap on it that was pulling it down crooked.... bet is my problem

yes everything is centered. I can make it pick a new "level" by turning off the atti, adjusting the attitude manual then turn on atti again...... its not a big deal cause i fly alot, but if his drifts off like mine does, that's gonna suck. not sim like if ya know what i mean. With that said...