Search results

  1. kloner

    Altimeters?

    the eagle tree barometer altitude thing is stand alone and cheap. less stuff required aboard, just needs power. http://www.eagletreesystems.com/Standalone/standalone.htm
  2. kloner

    Show your FPV video

    that's awesome! They've been good to me ya, alot of waterskiing happens around there outside the channel where the houses are.
  3. kloner

    little O/T, Zephyr ZII FPV

    that was alot of the reason wanted the thing, nice big foam float for flying the river. Thanks, lovin it so far, just never played with a stabilizer on one so it'll take some learning. I really need a laptop to tune this thing out
  4. kloner

    I have seen it alot. seems like it has something to do with vibrations and the way the sensors...

    I have seen it alot. seems like it has something to do with vibrations and the way the sensors interprit it. i've run a artificial horizon on my osd and seen the same thing, line get's locked over for a bit, then suddenly comes back. has something to do with the quality of sensors or the...
  5. kloner

    Show your FPV video

    goggles are weird to pull from your face. the light change alone is like walking outside in the day after watching a movie in a theater. this is my favorite so far
  6. kloner

    24v generator

    think the easiest way to do that would be to get two 12v batteries wired in series and charge them with the generator the server psu's are so cheap and easy to do it's not that big of deal to use them. way lighter than a set of car batteries, run off generator
  7. kloner

    What 5.8 channel do you use?

    I had bought a tuned set of antennas and had them tuned to 5800mhz so always flew ch4, 5800 to the best of my knowledge, if you got ibcrazy sets, there designed after the same ch4 on airwave give or take whatever he lets fly
  8. kloner

    Complete WKM crash into the water !

    mines been in sweet water and always just tear it down and dry it out before powering anything. usually a couple days you either see life or not. fired up too early makes stuff smoke, that smoking stuff never fires up a couple days later, it just keeps smoking I fly a complete f450 hero2 and...
  9. kloner

    little O/T, Zephyr ZII FPV

    that's weird how everybodies has a little different wiggle to it....... when i finally got it to the sky 2 things were wrong, the cg got off to the left with a vtx battery i had to change last minute so it gave it a slow left when stalled. made launching and landing extra work but my main...
  10. kloner

    It just bit me :) Learned again to take the props off !

    that sucks, heal up. guess i'm glad i got a restricted website error when i tried to upgrade the other day. You always think it can fire up but usually doesn't
  11. kloner

    little O/T, Zephyr ZII FPV

    mine was clunkin along 35 mph on 7 amps. carries 6000 mah i know, confusing as hell aren't they. i got this one http://www.espritmodel.com/bb-aluminum-turbo-spinners-for-folding-propellers.aspx and it's smooth, but solid so you can't ditch the cone and use a prop stop. That you want this one...
  12. kloner

    TBS Discovery, FPV Quadro from Team Blacksheep based on DJI Parts

    probably is, but the guy making them needs to let retailers service his customers. i've waited and waited. they don't answer emails, don't answer there support thread, i'm over it. bought my system 3-28, then a sec rx 2 days later. got the system early may, still no sign of the second rx, but...
  13. kloner

    little O/T, Zephyr ZII FPV

    got a chance to maiden this thing, just don't trust this dragonlink to save my life. get unreal ground range checks over 130 yards, but take it up and i get this disconnected feeling in LOS range, look at the rssi and it's all over the place. that aint gonna work. had read alot of horror stories...
  14. kloner

    TBS Discovery, FPV Quadro from Team Blacksheep based on DJI Parts

    that's good to hear, i hope it's more configurable than the sbus that's there. i had a spektrum rx with sbus and ch1 and 3 were crossed up with no way to change it Yea, all you need is the rssi for a quad, just remember where you came from I'm switching over to ezuhf, can't take any more of...
  15. kloner

    TBS Discovery, FPV Quadro from Team Blacksheep based on DJI Parts

    what all you putting on it?
  16. kloner

    TBS Discovery, FPV Quadro from Team Blacksheep based on DJI Parts

    the core is a set of switching regulators to power 5v cams, 12v cams, 12v vtx and 5v all off the flight power pack it is integrated with the pcb inside the frame to provide power where you need it. it also has a simple osd that shows volts, amps, timer, and rssi these are starting to ship...
  17. kloner

    Flight sims

    you stopped making since
  18. kloner

    Flight sims

    I own 483 copyrights, 3 patents and one trademark, don't gotta tell me about it. IF the owner of the property isn't doing something about it, it's there problem. We spend thousands a year sending off letters, sometimes it slows it, sometimes it stops it. But when your talking china, life is what...
  19. kloner

    Flight sims

    yea, got my full real version for like $109 at common sense rc when they had the sale......... these dongles came out about a year ago, the deal extreme one does 12 sims
  20. kloner

    Could I run an f550 on 6s?

    the 13" props are a different gig. You'd need slower kv motors to turn them like 720-740kv, the 1000 kv on 10" graupners with 4s are wicked fast and will carry alot. The stock dji setup that came on my 450 was putting out 450 watts, the same exact rig, 1.6 kg putts out 700 with the 2814's, makes...
Top