Search results

it eats a little overhead, but more important than 1000 watts is the whole 24v thing you want 2 of these...

http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_30_33&products_id=266 this tx with cloverleafs does 2 miles...... if your not getting that, you ran the tx without an antenna or your setup isn't right. These airwave setups take most the work out of it, switching...

naza is so sensitive to level even an air bubble in the double sided tape screws with it The local ACE here carries something called 3m vhb gel. it is the same as the stock adhesive, except doesn't look timed out before you even install it and it's a gel like zeal, but 1/8 the thickness so it...

naza has a level inside of it, you'd have to tilt the mounting of the naza to get a change in how it holds a hover. it doesn't take much, even a velcro strap over it with a little pressure to the right way is enough to make it straighten up. You want to lower naza in the direction it drifts...

that's not failsafe, failsafe has the throttle above 10% and with the manual/atti switch in failsafe. The vu light flashes orange fast when in failsafe. if you are seeing it, i'd put money on you don't have the manual/atti switch endpoints centered very well. manual says that's not what you...

I'd try firing it up and see if any are stuck in a stutter, etc. I've had one esc that only ****s out under load only. it's hard if that's the case, look on the side that fell first obviously It's scary not feeling connected with rc when your flying

dang, sorry to see her in the dumps. that's alot of nice parts. what do you think happened? esc, motor, prop? is there any data on these things like logs?

if you see tearing, do me a favor and complain here http://fpvlab.com/forums/showthread.php?4727-vibrations-on-upper-part-of-the-video

that Hugo guy too from circular wireless seems to be a pretty cool cat too. Him and Alex seem to help each other but hugo is taking it all a step further with his ideas. Makes 900mhz helicals that are a 1/3rd the size it's suppose to be is the latest. Tim at RMRC does a bang up job. if it's in...

just because a battery is what it says and took less than 500, had 11.5 volts landed doesn't mean it's not damaged. if it ever took more than 1800 mah in it's lifetime to recharge, it's got some sort of damage, if it ever got stored wrong, even more, if it ever got hot, even more. it's like...

was wondering the same looks like all gps related except a 5 speed idle http://www.dji-innovations.com/files/naza/NAZA_product_release_notes_en.pdf

Did it just failsafe land or did you still have control of it? My thoughts would be maybe your in a populated enough an area that enough systems were on and in dsm2, can cause problems. rebinding would have reset your unit id's and the like to where maybe it got you off the same id another radio...

I have 2 here, only played with one of them so far. Apparently some of them have a problem with tearing like this..... kinda hard to see, but the top of the predator shot thats color shakes back and forth, top 1/8 of the screen and only when i use it with my fatsharks. With the immersion duo...

I run 1550 mah 3s just because that's what i have a bunch of. Doesn't use much at all. Usually change out the pack every day, but it's barely used any of it. Anything more than 2200 would be overkill. I've read from ibcrazy that he recomends using the power from a car and using the vehicle as a...

wound up mounting this thing like they show on there site in a bundle, but i got it all in a sealed tube container thing. alot of guys were saying there lucky to get 100 yards with the dummy load or a mile in there car. i'm getting 130 yards attentuated and a mile and a half in the...

this one would be a good start for ya in the lower frequency. It has good picture, excellent penetration. When you step down to 900 you loose alot of the picture quality, can only imagine 600 http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_34_44&products_id=911...

what is your plans for fpv, slow and close, long distance? When people talk CP, IBcrazy is the first cat that comes to mind. he pretty much figured it all out and has posts on rcgroups and fpvlabs with tutorials on how to make them all, how long parts are for each freq, etc. Awesome guy his...