Search results

Sold

Did you setup some kind of account? there $95 plus ship plus the infamous sdi "handling", mine was $105 3 weeks ago

I've always let em sit between packs. it's a good time to look it over, shake out the fingers and take a break. it's just hard on the gear, of course it's yours and all the better reason to monitor it all. fly a pack and measure it then fly another back to back and measure. is it different...

to me your two choices are 1.3 and 5.8...... 1.3 will do down low behind stuff better than 5.8.... 5.8 has alot smaller antennas if you get into circular polarized. 5.8 immersion is alot easier to install and have success than others, doesn't need anything special for power or external batteries...

sounds like there server is down

they do but i see heat usually after double digit hours. i've always had tri-flow around so is what i've dropped in from time to time. If i'm going to the desert for the weekend and am going to fly 30-40 packs in 100+ degrees, i'll give each bearing a drop of oil. if they make heat, it usually...

your motors shouldn't be more than 130-140f..... esc's typically shouldn't be much over ambient. You want the motors to be making the power/heat, heat in esc's means there overloading 160-180f in motors would be too hot, problems will start. generally your gonna see the same numbers over and...

sounds like your battery is smoked. one flight using more than 80% kills em. if you ever charged lets say a 2200 mah pack and it took 2100 or more, you did it dji esc's and simonK flashed esc's dont need calibration.

thepelell, what props are on the 2814 750kv setup?

boot it up and shutdown a couple times, have a cigarette, come back and try again alot of people have this problem getting going, usually all of a sudden it works

i run em 4s with no problems, am using as much will fit in the back hatch at 4000 mah, it'll do 4400mah in 3s with blu sky brand. There a little thinner than the rest. in turnigy the biggest could get in was 3200mah 4s have fun, that's what it's all about

the difference is you have power. kinda like a 4 cylinder range versus a v-8 f150 versus a 350 diesel if your not into fixing every little thing when you crash you'll get mediocre results. This was one weekend gone bad. the week before i had gotten a cooler of batteries hot and i checked the...

I've ran the suppo 2814 1000kv on 4s with 9x5 graupner props. it'll carry 6000mah of 4s and fly for 12-15 minutes depending how fast you go. on the rig above, it carries the suppo 2810 1000kv running on 4s with 8x5 graupners. That's whats in the two vids above, 2814 is the river, 2810 is the...

the antivibration mat from antivibration mounts looks like this, costs $105 but does 2 frames. earplug gig is $5, both work the same heres my rig, everything on there is welders brand contact cement, always has been. has never "failed" and it rubs right off, alot easier than hot glue...

he hit most of what you need to know. if you want to make your gopro jello free even the way the chopper is now, try the ear plugs laid out like this. This will make your gopro act like it's ccd and costs a few bucks. Press em flat and cut with scissors to make even length tips from the plugs...

I've got the Digital 1.3 rx with saw filter upgrade along with the 1.3 300mw vtx with both types of antennas. the vtx flew once, the receiver has been used a few trips. if i had to guess, it's been turned on less than 2 hours. Looking to get $75 for both shipped.

crazy clear aint it. the immeresion rx is really nice, no flicker going between antennas and it seems more reliable than the 5.8. when the quad is one direction it'son that antenna. my 5.8 would bounce back and forth, drove me nuts cause it happened so much it made a shadow flicker thing...

the silicone mat is better if your doing professional shoots, it'll be there no matter what. the ear plugs are going to have to die over time. not sure when, but i'll keep ya informed. I too try keeping my rig vibe free, but the mat/earplugs definately give a guy an edge with the footage you...

I'm gonna doa case next. keep trying to buy that bolton on ebay, pelican clone, perfect subject for a boats fpv setup The backpack is cool, but you still need something to help support the parts like a mini tripod or something. i've never seen inside one. this guys the man, this is what he...

awesome, glad somebody here was able to do something with it. i look forward to the stories