Search results

  1. kloner

    Ford Escape TV Commercial shot with MR

    all the ford commercials are heavily using them..... car makers in general
  2. kloner

    Aeronavics / Droidworx DroidWorx Completed Builds

    he only has the 15x5 listed. there the same thing as the cf tigers so they need that short prop adapter. I've got them in 13x4.5 and 15x5 and wouldn't trade em for the world. http://aerialmediapros.com/store/82-carbon-fiber
  3. kloner

    Any power line EMI Guru's out there??

    a 433mhz frequency might be a cheaper better solution if it is 2.4 that's messed with. I have flown 2.4 video and 433 rc control down our sunrise power link within 20 meters and never seen interference on either
  4. kloner

    35 Mhz and 5.8 FPV setup.

    your better off getting into a modern radio. to save a thousand, i'd look at the futaba 8j. great little radio, under $300 and tower has em for 3 pay if your into that. the 8j uses fhss algo, same as ezuhf and dragonlink just in 2.4 It also goes a mile+ having sbus with dji is some good...
  5. kloner

    A big HURRAH for Secraft - a throughly honourable company

    I've never met/talked/seen the guy, nice try though........
  6. kloner

    A big HURRAH for Secraft - a throughly honourable company

    this is a weird post........ there product sucked, i bitched and in the end they gave me back my money so there an honorable company........ huh?
  7. kloner

    Arggggh! Camera Stop recording

    dont know about smart.......
  8. kloner

    Arggggh! Camera Stop recording

    that was the first sentence of my reply,,, most logical
  9. kloner

    Arggggh! Camera Stop recording

    wonder if light hits that led and prisms in to trigger the camera. what brand shutter trigger? we had a camera stop once in the weirdest scenario, the golf course ceo wanted us to rise on a SD chargers house, when i did the camera stopped approaching his house. We figured it was some anti...
  10. kloner

    Any power line EMI Guru's out there??

    when a full scale heli approaches a line they stick that wand out and energize the craft and themselves, what does it do to get too close without doing that?
  11. kloner

    Show your FPV video

  12. kloner

    Silicone Mini HDMI to Mini HDMI Cable

    the hyper wire is perfect for these,,,,,
  13. kloner

    I have a NAVA M+GPS and a NAZA V2

    those are the best esc's before simonK. it's what we used in the vbar with the governor cause it was fast enough like the simonK made all of them. it leaves your voltage cutoffs in tact so you want to change to ni-xxx and dissable anything soft, slow or brake
  14. kloner

    I have a NAVA M+GPS and a NAZA V2

    it is the assisted take off in the v2 firmware. go just over half stick and it'll rev up and take off, if you jam the throttle you take it over to a degree and it makes a fast take off....
  15. kloner

    New to fpv : need recommendations on gear

    the only 2.4 i run is video... 433 for rc i was flying a 2.4 cinestar a couple weeks back with 8 lbs of lidar stuff, one of the stuff was a 2.4 wifi connection to the ground. Everytime i got in one spot 80k rolled up on it's side and i had to decide,,,, here or there. We brought it home after...
  16. kloner

    New to fpv : need recommendations on gear

    it kinda depends on the area and your winlingness to use the single use permit channels. 2.4 on 2410 or 2400 sucks, ton of interference. channels 5 and 8 work amazing but is illegal. 5.8 all work, are all legal, both have about the same quality of view but the 2.4 keeps going further and lower...
  17. kloner

    New to fpv : need recommendations on gear

    a basic video system is a video transmitter, video receiver and a camera with an analog output. it can be a red epic with hdmi converter to a hero to a security camera. the only issue with a hero for an fpv camera now is it runs on it's own batteries and it's something else you gotta charge and...
  18. kloner

    Brushless Gimbal for GH3

    and resolution like your servo gimbal.
  19. kloner

    San Diego!

    whats up rob
Top