Search results

you want 5.22, it's so smooth it's so not like anything dji i've flown. 5.20 i thought was super buggy http://www.dji-innovations.com/download/wookong-m-downloads/ all the firmware is still on there site, it's just harder to find

is something wrong with 5.22?

all of the crosshairs havew a balun, it's the part you need a plummers torch for. i believe it does something to the ohms. never the less, it's just part of the tutorial on a crosshair. I can make 10 crosshairs or 30 omnis in a days sesh the copper tube in the center holting the elements on...

everything you need to know is on the tutorials..... silver solder, you need a good glue like goop or welders, need a pvc to use for a mast, little heat shrink, but more imprtant you want the crosshair antenna for the ground station and that takes a plummers torch, flux...

even now just running around flying alot i go through a couple a month.... when i was going to the river all the time flying off a boat with a couple labs i'd go through a couple a weekend...... the non encased fatshark type go away alot..... even with silver solder

Always have. Bought one from ibcrazy then getting another was like pulling teeth so i dove in.

on rc groups and fpvlabs ibcrazy has all his recipes posted with full blown how to tutorials. a $70 antenna costs $5 in parts if you know where to shop. ebay has the sma for $1 a piece, my local wire shp has rg316 for $.50 a foot, a spool of welding wire is $10 and enough to make a million 5.8...

I wouldn't worry about a pitot tube on a multi rotor and i wouldnt recomend using the return to home on a multi rotor. They have a full flight controller and osd that's all one unit coming out soon that would be the one to use in that case. This one is nice for on screen nav, shows current...

no, were running two seperate bords. The martinez on the roll and pitch cause it's high amp, the alexmos on top yaw it has the heading hold..... the gimbal is some diy one from rcgroups. jcmonty is heading up the venture.... we want brushless on the big boy and we want it now as soon as the 32...

yes i do, send an email to steve@kloners.com

the alexmos is 1 amp and the martinez is 3 or 4 amp a side...... we got one coming,,,,, should have some results within the next week. hanging it on the jib

it is in feet..... use all immersion ezuhf and lawmate 2.4 video. that's just the gps module doing airspeed, but a barometer on the altitude

as long as the board reboots after it's uploaded to your golden. ignore the error, try opening up the gui. i have the cgs shop alexmos board and had to enable the imu to get it working right. theres a little box to check...... then write, then mine came poppin to life.

quite the contrair,,,,,, there the nicest motors in the class i've flown. It just took a while to all come together. They still have short motor wires but the shafts are all trimmed, has a nice prop adapter, etc. They don't do much in the efficiency category, but the smile everybody gets walking...

if you want it to go fast stay away from the coax, if you want it to slofly in wind, get the coax

sorry bro, i'll do another on the house if it helps...... you really needed them lil buggers. how long does hobyking orders take to get to you? does it go straight in or hit that freight broker on the way?

dam dude, you fubard that one good. i'd suggest that prop adapter wasn't up to the task...............

it goes forward and up alot like a hoverfly, but it still has a dji aggresiveness attack at the sky coming back down. just a tad. i was on 5.16 forever till the last couple weeks and my film totaly changed. super tight in atti, i'm dragging the cam a couple feet off the ground chassing stuff fpv...

it's super smooth, best $hit i've ever flown from them