Search results

the 5.22 is insane, you want that on your wk what esc's do you have? I've got a hfp with pancake motors and 14" props on a quad and there slow to get going. my amp motors and 15" props on the jib like to do this too, but not every time and not the same motor. it's random and usually a...

man that's confusing. i've never understood it enough to try it. still dont get it

5d with 13" props gets me 6 minutes on 10 amps and 9 minutes on 20 amp hours. right at 30 amp hours it needs 15" props but gets the best mileage. a red with 20 amp hours hovers at 100 amps with 15" props

his monitor is most likely not up to the task of an analog signal. the ones that don't "green screen" would be the ones you want

places like quadrocopters and aerial media pros offer 6s packs like this. if there too much $, goto gensace.com and order direct but it takes months to get them that way.

aerial media pros has 15" cf props and usually 15" xoars too. i like the cf better except the price

last year they were at gander mtn for $9 ea

calibrate the imu

Every rig has a number.... depends on esc's, motors, props. Some rigs are 100, but if the gain is low i have seen em try flipiing over, when there too high, ive seen em act hypersensitive to any little movement that makes cameras shake, instability, etc....... I would never make a remote gain...

my 800 hex is 160 and my skyjib is at 100..... they both sound and fly the same but ones naza and ones wk this isn't a number you nail by guessing, you fly it. put the top rown on one knob and the atti on another and dial it in

follow the light.............

usually it is 120-160 on the manual gain row and 85-100 atti. if it oscilates at all wa wa wa wa then too high, if it's tipsy and slow to correct it's low

hit enter when you change a value.................

a friend of mine ordered that thing back in february and it still hasn't shipped

i'd expect this to have come from an unbalanced prop that went into a major vibration or a motor bearing that was leaving left....

flipping over is too low of gains on a naza. you would never expect any flight controller to work with (default gains). I fly a 12lb 800mm hex with a naza, flies 60 mph and it is butter smooth. I've also got a wookong on a jib and they both look the same, great. wk used to have alot of extra...

that key makes it a nightmare to deal with balancers. regular round prop holes work fine but it takes washers to do it with a dji motor.... i think it's a 6mm washer for each motor. no glue, just tighten and fly

....... they do not refund any money for damages or time, ever

doesnt he needs 6s to fly? I run a seperate battery for the gimbal. it has an 1800mah 3s pack on it and it rarely needs charging. You could easily use a 1000mah or even smaller if you wanted and it'd most likely run all day long

good job dude