Search results

even if the camera tilt and roll compensation dosen´t work as bad as MK and or equal, there is still the hope that DJI might interested in woking on it and making it better. I am happy to hear that its working and that is wasn't just a hype ! Boris

Hi Pootman, I wouldn't be concerned about changing servos or focusing on the camera gimbal. Start from the beginning to fine tune the setup. What I mean with that is hard mount your camera. Deactivate the servos so no stabilization signal comes from your FC and strap down the tilt and roll...

never heard of it gonna check it out. thanks ! Do you have a product name to the liquid tape ? Thanks Boris (edit) ah get it its big in the states and common.

lets hope it does what its suppose to since i am using the Axi 2820/14 with current capacity to 36A, but its should be fine. Have to keep a close eye on it. Boris

Mounting plate for WK-M finished and distribution ring between the Centerplate. I like the fact that you cant even see it and hoping that the folding of the booms inlcuding the motor wiring inside the booms and the ring wont be a problem. At the moment its looking good. Just found a guy 5 min...

older version

RBlax, what you should really be looking at it the picloc 3x from http://www.rotorpics.com/. Should allow you to do everything you want and probably better than any FC at the moment you can get. These should be finally shipped end of September. Thanks for your interest in Picloc-3X. These...

Great ! I was going to cut the negative loop, but wasn't sure yet were I will end up to attach the lipo wires. No real reason for braiding just that I didn't have any thicker cooper wire by hand and then came the idea to make it more solid and braid it. Cant move my fingers anymore :). And you...

Started with the distribution ring for the ESCs, never did something like this before and somewhat followed and copied an approach from Mactadpole. The cooper windings are isolated with self binding isolation tape and should be okay. Any concerns or did i do something wrong ?

uh uh excited ! Best of luck to getting this thing up and flying without any complications. And hope your area wants hit to bad ! Boris

yes its a peli case Peli Peli 1730 WF http://pelican.com/cases_detail.php?Case=1730 1730 Transport Case Interior Dimensions: 34.00" x 24.00" x 12.50" (86.3 x 60.9 x 31.7 cm)

Hi, since i decided to use the WK-M on my new system gonna build up the thread about it here. Following frame: gonna cnc some carbon plates to mount the MC and IMU, and LED. To stay in the tower format hoping thats gonna give me enough space to mount the ESCs on the...

Thanks, eventually i think it will be important in order to compete on a full scale with systems like MK to provide some down link of the data already given by the installed sensors. But cool that its being considered. If its only a software update and no change of the hardware is needed I guess...

lil confused about it; manual · WKM is powered by one battery, and can operate with a 4.8 to 12V DC. Please choose a proper battery which meets the spec of all your electronic equipment. (E.g. you have a servo(4.8-6V), a receiver(4.8–8.4V), then you can choose a 4.8 to 6V DC.) · ? Please DO NOT...

Hi guys, does the WK-M provide any data about its state ? Lipos GPS Height etc. As far a what I could see it dosent provide any or did i miss something ? It has a usb connection though can this be used to downlink some data via xbee for example ? Certainly it would be good to have some...

Okay my setups together, Rc Carbon/Coptersky Hexa 900 mm frame. AXi 2820/14 didnt want to wait another 4 weeks for the bigger ones. Switching back Graupner Modul to PCM 35MHZ Receiver - SMC 16 SCAN 35 MHz Graupner Turnigy Plush 40A ESC. Boris

not knowing to much about RX/TX setups i guess i cant use my Gruapner 22 MX Jeti with the DJI WK-M Jeti being PMM and DJI needing PCM or am i misunderstanding something ? Or is there some converter or other work around ? General specifications Recommended Transmitter: PCM or 2.4GHz with minimum...

the good one is that we have to worlds approaching the DJI. Ken knowing his **** and me noob with his first Copter being a RTF model approaching the DJI as his first build :) Ah its gonna be fun :)

ah thanks for pointing that out, got those ESCs recommended from someone using them for the 4120 axis, wouldnt have seen it, I shouldn´t be late night shopping :)

Hi Ken, thanks for the explanation !!!, Just ordered the WK-M :) I actually wanted to go straight forward and us the WK-M with my 900m Hexa Rc-Carbon Frame, and give the setup some HL motors 2820 Axis. Same thing i would have done if i would have used MK boards. Maybe a little bit of an...