Search results

ah okay i thought you have the possibility to read out the data via xbee or similar, during flight. Hook the bird up to your computer just calibrate it and check out the nick gyro action when you tilt it backward and forwards compare it to the roll gyro. Should be doable with a longer serial...

Hi MombasaFlash, are you sure everything is still in beginner setup ? Please post your Setup: FC ? NAVI ? Whats happening in your scope to your gyros ? If your using Navi and Gps disconnect everything and disable them in MK tools. Try a solo flight with the FC. Can you show the actual...

hmm strange got an email with your last post, but cant find it here. Quote ------------------------------------------------------------------------------------------- Nope. It started doing it yesterday - now and then - with the LiPo attached. But that is not the main issue. The main issue...

By the way got some numbers on the axis and thrust from Kopterworx, might be interesting to some.

HI Ovdt, andreas answers some questions in the text below. The question/answer about the possibilities to use the 4120 axis puzzles me. I think he is stating that for such motors the current Hercules wont work ? Guys, Quote 1) Do you talked with MK staff to try a total integration with MK...

Hi guys, my goal is to get some extreme heavy-lift motors on my Hexa, like the Axis 2820/14, 2826/12 or 4120/14 or even the plettenbergs. As far a I understand with my given basic knowledge the MK distribution board and the standard BL-Ctrl are not an option anymore if it comes to such...

something like this works for me

Hi Drik, Do we have any news on the plettenbergs ? Anymore details on the special version you are creating with them ? Thanks Boris

Hi Jappie 911, try to loosen both the potentiometer and the Servos from the main big tooth wheel arch, so there is no more contact. Push the potentiometer up and also push the servos up. Than calibrate the FC so the servos start acting. The servo is probably going to spin in one direction. With...

Ross, did you mean I2C serializer like this one http://www.youtube.com/watch?v=q90E5BtOzVI ? Considering bigger motors for my build and not sure how to handle them.

Hi Moslow, looking good ! What were your reasons to put the camera mount all the way upfront ? Not only because of being more flexible in using different cameras and lenses to not get an copter parts on the cam ? Boris

ah cool Im going to do that, thanks for sharing ovdt

1. einzelnes Piepen beim Einschalten und Kalibrieren -> Vollkommen normal, ruig bleiben, durch die Hose atmen! - Peeping after turning on -> Totally normal calm down, breath through you pants. 2. langsames Intervall, mindestens 1 Sek -> Empfangsausfall...

Hi Mombasaflash, it sounds like a low voltage warning with 12V. Disable the voltage warning in the MK tools or bring up the voltage to 14v. You are powering directly to the distribution board ? Boris (Edit) if its not that tell me than we will go through the other possibilities

dont be distracted by my gyros doing such a wave link lines. They are doing that because the copter is swing back and forward on my balancing out construction. Normally having the kopter stand on the table they shouldn't be doing that.

ollie332, check out my i am going to cry for a week thread on page three i go through alls the scope gyro testing stuff with videos of the scope http://www.multirotorforums.com/showthread.php?753-Gonna-cry-for-a-week-!/page3 that should help you. (edit) and thanks to crash i figured...