Search results

Thanks Ken next flight with 150% and lets see what happens.

okay got it up. Once again was s......g in my pants but did it in the apartment, since the weather didn't allow. Its a little shaky i guess i have to tweak the gain of attitude. http://sprealinvest.at/WKM1/WKM1.mov Was ist behaving better for you guys at the first start up ?

Weeks since i could fly and test the last changes i did to the AV 200, but i also got the 130 AV now on my DJI HEXA (didt really see any other options) think i went a little overboard with the silicon. Certainly isolated from the vibrations now if any get to it. But at the same time the whole...

I am confused the throttle range calibration of the ESCs has to be done with the MC connected to the ESCs or with my TX RX ? or dosent have to be done at all ? Thanks Boris

thanks bart ! what I dont get. If they say 12V, do these things take a 4s with 16.x. As far as i understand some do. Some get to hot and burn etc. How does one know ? Boris

he dosent say, all i know is that he is using them with 4s says they are running warm at 12v and with full 4s you need sunglasses. He is also offering gren blue and red, but i think they are not so bright. They seem to be mounted on an thicker aluminium piece since they get so hot Boris @...

japp in german though http://forum.mikrokopter.de/topic-27946-1.html

Hi Guys, one of you know anything about these LEDs. In the german MK forum they are starting a ordering thread but i would prefer to buy them with out ordering over a second person. http://www.youtube.com/watch?v=BA1qndLzO8c Would be cool if one of you knows a similar product. Thanks...

Jesus i just learned my lesson !!! I tried to hover it once more in my appartment same behavior wanted to tilt forwad. Than all of a sudden motors go to half thrust, 6 2820 axis no payload and the bird goes up for 2 meters, (luckliy i was in the loft part of the apartment) and than the lipo...

hmm tried a test hover today, and he is trying to take off nose tilted forwad nearly flipping ? so I didn't give him the last push. Ken what was your experience. Does it take off smoothly in attitude mode normally ? Thanks Boris

Thanks Ken, Im confident today and i will hook the lipos on :) One good thing that i used the power supply at the beginning my throttle was reversed i could have done the Droider :). @ Wayne thanks for the info I am really waiting for the results concerning the AXIs on this page. Also...

Thanks Ken for explaining this for me. I more or less finished everything up and and have the system running on a voltage controller and everything seems fine. I am really paranoid though to hook up the Lipo for some reason. I tried to fire up the motors with having the voltage regulator given...

okay thanks guys, i will switch the settings. Just did i short run with a servos tester and i was shock how fast the motors started turning so I set it to very soft start. But actually i think it was the servos tester that dosent send the right signal !

yeah forget it i am not going to have a switch on my remote that turns of the motors. It happened to me so many times that I hit something by accident on my MK already to dangerous. Thanks for clearing that up for me. Since i don't have any heli or plane background this is all new to me. What I...

Hmmm i will try it out later tonite Felipe and ask once more if plane mode it okay in RCgroups. I have no clue of any curves etc, that might play a role. Just configured any finally mounted all the ESCs. I hope this config it okay ?

okay tried all the Heli modes, none of them works. I guess I was misguided there and wrong that it should be configured in heli mode. In normal plane mode everything is working the way it should, hope this time i am right. Was a strange sunday since i found out that the pharmacy in my house had...

1. I have just been checking out the DJI assistant software and wondering how it will work with the gimbal on an octo setup. In the motor mixer page, it appears there are 8 channels, with the last 2 for the gimbal control. Does this mean if you want to configure it for an octo setup, that...

thanks Felipe, just charging the batteries for the 22mx and than i will check it out. Boris

Ken when did you buy your AV130 time wise. Planning to order one, not directly but over a store and want to go sure that its the newest one. Thanks Boris

okay i couldnt stop, started configuring the WK-M and i have a basic TX problem. I dont know to much about the Graupner 22 MX setup and heli mode etc. But everything works except giving the FC a forward and backward command also results in a yaw input for the FC. Does one of you know why these...