Search results

lets see how good this dist. ring turns out. Working with it was really easy and a clean job. I love liquid tape. Thanks to who ever recommended it. Only substance I cold start a fetish with :) @ jes111 if you see anything wrong about the dist board don't say it bah bah dont ! :) I...

ah okay i have the whole cine star bird on my radar. I looked at the different parts and the motors yesterday, had a chance to hold them in my hands and really liked it. Compared to that I had the Skylib 8 standing there. Looks amazing but damm its heavy and massiv looking !

by the way whats you opinion on the QuadroPower Motor QC3328 from the us boys ?

what else is left except the axi 2812/22 and the plettis you mentioned something last time, with a statement similar to you still have to check but they might be to good to be true ?

Jess thanks for giving an understandable interpretation for the numbers. Im am not happy about the numbers but i also don't understand why the controller would over heat. I also calculated that yesterday but with every controller i choose even if i would have selected the 100A one i got a...

i got these two different versions. -------------------------------------------------------------------- 1 BGELA006 ANTI-VIBRATION GELS 4 16.20 64.80 2011/09/06 -------------------------------------------------------------------- 2 GELB1101...

but you can also ask kopterworx.com he might have some in stock and sell them, you probably get them faster !

http://www.abusemark.com/store/ , i got confirmed that it can take up to 120 A without probs. so it should also supply without heating etc. for bigger motors Boris

Hi Dixter, i am going to switch over to a product for the distribution ring. Things just get cleaner i have very short cables directly to the ESCs and the weigh will be reduce by 50 - 100 Grams.

I cant really tell you yet. I am hovering most of the time with my copter and i don't think that the motors are pulling more than 10a max at that state still the ESCs are getting hot, close before pain level. I have to test change and try 2 options: Lowering the timing mode to low or middle...

tahoelight, my AV 200 with MK FC was never better than yours in that specific simulation you did. The last steps were alway slow or delayed or not accurate at all. I am really looking forward to testing the DJI stabi, when i finally get my replacemtn servo for the 130 AV.

Dave i got them from http://www.misumi-europe.com/start.aspx?lang=DE. I dont know if they sell to privat think only to companies. If you cant get hem tell me i can organize ! Boris

okay thanks a lot guys. Jes, my life has been trial and error i am addicted to it :) Ran the numbers in ecalc Since i already have the motors and the bird flying the only thing i can tweak for this are the props and lipos. 4s...

Hi Ken, okay thanks you have a point ! Once i get the new servo i will dig into this. I am im a similar situation. I had the Hexa flying a couple times perfectly in my neighbors garden. All i had on my face was i big grin. At the moment were wind hits the bird it starts wobbling. This can...

HI David, thanks for the explanation but now i am confused again :). Please correct me but thats what i am pulling out of your explanation. More voltage thus more current can flow which will result in more heat. But in a practical sense a system that needs 40A at full thrust with 4s will need...

Droider, the second video seems to be stabilized ! Everything under 1080 is suspicious except you know the person and that person being honest :). I doubt that these 1080p vids directly from DJI or who ever it is in china or hongkong are post processed.

hehe :) no no at some point i thought i have to start testing motor and prop combos, and wanted to build a setup stand etc. Than reality came back that i actually have to spend a couple hours with my company during the day and cancelled that project :)

Okay thanks Borneoben, I just ended up in some physics forum and got completely confused :) Also going to test to set down the timmig on the ESCs to middle, that could also help with the heat. Boris

Pics

Hi Ken, would you be willing to share your Setting for the AV 130 on the WK-M ? My tilt axis is working nicely but roll is not doing what it is supposed to. Since my servo from the new AV 130 blew at the first startup i had to use the servo from my AV 200 which got a couple punches before and i...