Search results

anybody know when the shipment of the discovery will start. States this past wednesday but did it really ? Disassembled my HT FPV already and waiting :) Boris

Okay so you quad will be bottom heavy the motors alone on top won't balance it out that the COG is directly in the middle between bottom and top plate. Consider your bottom plate to be the COG for now and measure from the bottom plate to the middle of the unit. Take that value and enter is as a...

Were is your lipo mount top plate or under the bottom plate ? If you try to hold your quad vertically with just two finger on the arms in witch direction does it want to turn top plate or bottom plate ? It doesn't have to be 100% If your off 1 or 2 cm its not going to make a big difference. Boris

nope you won't need a second power supple, if using s-bus or traditional connection the Naza will power the Recevier ! Boris

this might help: boris

ah great thanks that clears it up. So what going on with the poor guy in the video 500m and that was it ? Boris

http://www.dji-innovations.com/products/wookong-m/downloads/ boris

interesting seems like they are producing/assemble in house or at least have there logo on the factory door :) http://www.rcgroups.com/forums/showthread.php?t=1606659&page=61 Boris

don't forget the calibrate the compass ! otherwise the GPS hold could not be working. Boris

Ah very nice Graz and the whole area is very nice. If you come buy vienna drop me line and we can go flying :) Report from your GPS maiden, if everything worked out. Boris

by the way the little red arrow on the gps unit has to point forward to your quad. If you are in a area were there is a magnetic offset or magnetic declination is could be that you have to turn the gps unit a little to compensate, but try it out first before you go crazy about it...

for sure it will be a negative value since the gps unit is over the COG check this video its for the WKM but same procedure.

its taken from the the middle of the GPS unit to the COG on the Z axis. Were the COG is on your axis i can't tell you and its a little tricky to find out. It will probably be somewhere between the two center plates. Looking for a video that explains it for you. One sec

just looked at the video the guy dosent know what he is talking about. I now understand why some people don't get good performance and their position hold :) Center of aircraft plays no role in all of these measurement. The only thing important is CoG. If you CoG happens to be in the middle of...

no no, the diagram just gives an example how you measure it if your GPS unit id to the right and the back of the COG. If you can place the GPS unit onto the COG the better, you don't have to measure and enter any values. Boris

Ah thanks didn't see that. But I am going to get rid of the Ezosd anyways and only use the core. MEme if you have the time enlighten us if the core also has to be calibrated etc. Thanks Boris

Thats good. If your quad is in balanced in general ? So the center of the top plate is also the center of gravity on the x and y axis. If the GPs unit relative to the COG falls into the green area than you need to input a negative value if its in the red area it needs a positive value. Since...

I have the ImmersionRC EzUhf setup and i am confused because all i have on my OSD is a RSSI value that increases the further the bird is away. But i have no clue how high it is allowed to go and i can't find any reference. You can set an alarm when it reaches a certain amount but no clue what...

Ah very nice can't wait to get mine ! Meme what does your RSSI state when you are 800m out ? I am completely confused by the values given. What the max RSSI value one can go before it goes critical ? Boris

cool gonna check them out and see which of them i can get on the TBS frame DJI arms without a hassle ! Boris