Search results

can one of you check if these fit onto the dji arms want to switch over to the TBS setup thanks Boris

Gonna check Vsen. I think you are addressing the right point could be that the USB connection drop at the wrong moment !

Japp it acutally did while USB was connected and Outputs were off. I was holding the fpv bird in one hand and the notebook in my lap, sitting on the stairs to get a better wifi connection. I hit upgrade 2 secs later I got kissed. Luckily the lipo ripped off. I guess I grabbed it with some ninja...

Luckily I didn't need stitches on my head the cuts weren't that deep. But how that thing wanted to wrap itself around me and didn't let go, that was real love :) All during firmware upgrade I am positive the boot loader is gone. Oh well at least the doc was cute although she wasn't to down...

Haha already at the hospital hard one to explain what happened :) and why at 3 o'clock at might :)

Just wanted to upgrade my Naza in a late night session thought i would leave the props on and during upgrade the Quad went to full throttle cutting up my arm top of my head luckily nothing in my face :) But this was pure luck it could have landing completely in my face and that would have been...

japp i am pretty sure they are OEM tiger motors. You can asked achta a user here in the forum who is using them and is more than happy with them. He has a couple heavy lifts and if i understood correctly he switched his plettenbergs to the KW8. Boris

Heinz i don't think it will make a difference, it happened to me before and i certainly didn't have 5.06 or 5.08 on. But you can probably find what you are looking for here: http://www.rcgroups.com/forums/showpost.php?p=21918563&postcount=12796 Boris

I am actually using the 3m round sticker thingis that come with the WKM. I guess the thinner and more sticky the better. Any material that has play in itself i cause problems. Boris

yeah I had the same drift offs now with my CS8 and with my CX4 altogether maybe 4 times but only in GPS mode it stays with what it is you have to keep your eyes on the bird and be ready to switch to attitude or manual if something goes wrong. Boris

They introduced the idle speed option because several users on RCgroups were complaining that the initial motor start up speed was to fast etc. Boris

was flying today with pretty heavy wind and the white flashes only came rarely. I think the problem with mine was that the IMU touched to the center plate and that i used the wrong tape to mount the IMU. Normally I mount the IMU and fix it another time with some zip ties to really have it...

well in heinz's case he is not planning to use the Zenmuse but i guess a standard av 130 or av 200. Since those are not really the capable of neutralizing any wobbles in the wind he is more dependent on the gain settings of his FC. That in combo with the zenmuse the gains become less important I...

like this delevopment http://www.rcgroups.com/forums/showthread.php?t=1486386&goto=newpost PPM for WKM and Stabi outputs 400 200 100 50hz Boris

Well I guess for the normal user with money it's a good solution. For the actual "professional" it will be a good setup for a job were the wind is just a given, secondary backup machine for mid to strong wind conditions and you have to deliver. If the other direct drive gimbals will achieve...

hmm for me its a clear case the restrictions are not that great, lens cam model etc. but if this is really the out come in windy to storm like conditions, I can deal with it. Boris

Heinz it will always be the same situation and the best is to but your Roll and Pitch basic gain on a slider and your attitude gains on another slider and change them during flight until you find the best setup. Think most of the people are not flying with a weight around 6kg yet waiting for...

japp thats the thing. I guess it only works in combo with a futaba transmitter since i have a graupner transmitter with a robbe/futaba module for RASST I can't do it. Thanks for the email/explanation ! Boris

i never managed but the manual for the s-bus receivers suggest something like that, but not sure: http://manuals.hobbico.com/fut/r6108sb-manual.pdf Section Servo Channel setting mode Boris

nope didn't get to it yet. Probably this friday or saturday. But some guys in the RCgroups forum tried the settings and weren't too happy. No sure whats going on and the topic was touched by the vendors in the regroups forum but not answered yet. Boris