Search results

  1. BorisS

    Zenmuse as a stand alone gimbal

    Denny any concerns that the Zen will not keep up the performance over several hours of use ? When you tried different lenses on the zen and balanced out the setup for it to work was there any lose of performance ? Thanks Boris
  2. BorisS

    Cinestar Rev.6 with WKM does little yaw movements like a pendulum

    japp try it out. Put just the yaw gain on your radio and experiment with it. I took up my cs8 today after a long time and forgot about the yaw gain at a 100 % and it was wagging around like crazy. Around 180 it became better. There is a lower limit for the yaw gain than for the rest i don't...
  3. BorisS

    Cinestar Rev.6 with WKM does little yaw movements like a pendulum

    Cropter how high are your gains on the yaw ? Boris
  4. BorisS

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    I don't think so. I was flying it 3 weeks ago at our vienna copter meet. First on a big field a lot of wind pushing it around took it down and the ESCs were cold. I was embarrassed though be the wobbles and dance it did in the wind although i had the gains on the radio i couldn't get it to be...
  5. BorisS

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    ****ty = s.h.i.t.t.y, meaning that sucks. :)
  6. BorisS

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    Thats just ****ty !!! sorry to see that ! I just started working on my CS8 again even if the S800 comes back fixed or what ever, I think i will wait to put the zenmuse to it and use the CS8 with it first. Boris
  7. BorisS

    Wanted help Needed :(. I need 4 KW8 motors ASAP Please, or 8 new Axi 4120

    Did you ask Matjaz directly if he can help you out ? I don't think you will find the KW8 anywhere else. Since they are his OEM design whatever you want to call it. Boris
  8. BorisS

    DJI S800 Product Bulletin - ESC too high temperature

    Rsun the problem is that no one knows or can determine at the moment if its only Preorder production units or units produced afterwards that are effected ! Leaving out the question if it is acceptable even if only preorder units would suffer from ESC problems. You should really consider to get...
  9. BorisS

    Zenmuse as a stand alone gimbal

    These are from a guy in lower austria :) mounted the Zenmuse on a different frame due to the problems with the S800 at the moment. and pushing it around a little harder Boris
  10. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    you can also check these. http://www.kopterworx.com/vmchk/New-products-in-Shop/Lipo-5s-8300-35/70C new ones from copterworx. Think the guys are flying those now for their big birds. Boris
  11. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    don't remember the weight of the copter but think it was with full gear so CS gimbal and a Gh2 stock lens. charge discharde logs to see what goes in. I have a 4s though probably more possible with 5s 6s and weight wise probably still possible that you take two 11000 Mah in parallel. And...
  12. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    personally weight Mah/ ratio and true rating these are the best you can get at the moment. Pricey but worth the cash. The reports that i was reading is that they are also easy going if there is a problem bigger inner resistance as expected etc. http://www.maxamps.com/products.php?cat=24 have...
  13. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    other thing is stability looking onto the bird is one thing. I was wrong a couple times before. When i mounted a go pro and looked at the video afterwards things looked differently. If you want to do that test, hard mount the Gopro though onto the center plate for example not on the gimbal. The...
  14. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    japp looking better in the ground effect with the 14 x 4.7 I am still positive though if you bring up the basic gains a little that the 13 6.5 aerobot will out perform the 14 4.7 not in flight time but stability. Concerning the LED and the signals i am a little worried though looks like white...
  15. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    its an interesting one since the APC 14 x 4.7 always caused the CS 8 to be very unstable for me, but again i am not using the pletternberg but the standard QCs. The 11 gram 12 x 3.8 cf from MK and the ligther aerobat 13" version were a lot better. Shows again in my eyes that its the prop Motor...
  16. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    if it feels right and than it will be okay. I always tend to start with low and work my way up. Did you do your throttle test with the WKM in attitude or manual mode. And yes the WKM has a throttle limitation for sure since it is also limited to 6m/1sec climbing rate. Which in my eyes dosent...
  17. BorisS

    Wanted wanted....Droidworx AD8 clear dome, new or used in good condition

    Thats the one i got. Dirtly painted since i tested the spray cans on that one for the CX4 but i can easily be sanded off and painted again. If someone wants it tell me. Don't remember that their were different version, but it was for my AD 8 back than.
  18. BorisS

    CS8 Wookong and Plettenberg motors and battery data, and build information

    did you test the different timing setting low mid high, or did you start with high ? Boris
  19. BorisS

    Wanted wanted....Droidworx AD8 clear dome, new or used in good condition

    Bart I have one that I painted black once. If interested tell me. I can make photos of it tomorrow, 2:12 don't have the energy anymore to do it now. You can have it for free Boris
  20. BorisS

    CS8 so what am i missing?

    cool that you found it ! Never heard of a ESC reversing after a blade strike strange one. Boris
Top