Search results

the ones around 30 A normally don go over 4s. The only ones i know are http://www.castlecreations.com/products/phoenix-35.html they used to have 30a that of over 5s but they seem to be discontinued. Boris

Japp was a whole hassle. Didn't want to deal with going to shops for getting the spare parts so i ordered them over FPV uk something. Got the wrong length first since and they send me a second pair with the right size etc. Lets see have some TBS version coming. Since my HT FPV is already...

benjamine check out the http://www.kopterworx.com/Motor-Servo-and-more/KW8-pro-+-6mm-adapter I think they were especially designed to get a little more punch on the CS8 than with the normal QCs. No of some guys here in vienna after the plettenberg dilemma that switched to them and are happy...

Nah those OEM Tigers as in the QCs take 6s have flown them with it and they are advertised like that http://www.quadrocopter.com/QuadroPower-Motor-QC-3328_p_392.html and so do the torxs http://quadcopters.co.uk/torxpower-3536-pro-heavy-lift-motor-700kv-124-p.asp axis are certainly not tiger...

Hi Kloner, you are right at that time i didn't have a 3 lobe so i just stuck the 4 one on to have a finished foto of the build. Video transmission was never an issue with this 2.4ghz system, but i will take your advice and separate the vtx form the lipo more on the next build ! What do you...

Japp and i didn't have any interference in the 433 range . I suspect the antennas. I have the Discovery and the QAV500 on its way and some EZuhf antennas from TBS if i still have the same results I might have to send in the EZuhf gear for a check up. If thats possible. I also have quite some...

This was my setup: Had the Sandor Style Antennas on the bird and Transmitter. Standrd ImmersionRC 8 CH EzUhf and the Immersion RC EZuhf on a DX6

guys pleas don't just enter 0 for the Z axis value for the IMU there is a reason why you can change that value. Its not rocket science to find a close value. Setp 1: 1. I choose a imaganery line (in this case blue) which i take as an starting point to consider were theheavier parts are...

Both are getting more improvement. The Av 200 the skyline which is stuttering a little at the moment and the CS gimbal is getting its carvec stabilization. For the AV 200 there are also direct drive upgrade announced if those will come out to the CS i don't know. John it really depends what...

Nice one Meme, hope i will get the same results. With my Ht FPV and the EzUhf antennas I had 50 rssi value being out 400 m maybe. Ah lets see Boris

There are cheaper ones. But i already ruined stuff with the cheap ones to i stick to CC from now on. If you want a cheaper one look for a bed that can do 5v/6v output and up to 5A.

NAh you need one bec that can provide enough A for both servos. I would recommend a little more in the pricey side but good quality: http://www.castlecreations.com/products/ccbec.html you will also need the CC USB link to program it. Can give out up to 10 A more than you need and you can...

someone is going to get spanked at DJI. Must be annoying for them too. Correct procedure would be to send out a, unit, cab-bus y harness whatever for free, extra shipping costs for them etc.

HI John, japp the MK FC can stabilize whatever 2 axis gimbal you choose. Concerning the amps that the servos need or even the voltage it is better to use a separate BEC. Once to be flexible on the voltage and the MK FC docent provide enough amps for most servos or lets say it like the the ones...

I would also be shaking with fear. But ask Matjaz and Lanzar from Kopterworx, they just did some some toyota commercial https://vimeo.com/43859300 flying red etc. Boris

you could probably fix something up yourself. But I extended the LED cable once to get the LED all the way through a CS8 arm. If you make the slightest mistake the whole system will be taken down and result in a crash. These can-bus cables in the WKM system are a ***** to solder, doable of...

just posted in the zenmuse thread lets see what happens or they answer Boris

gonna ask in the Rcgroups in the zenmuse thread. I also wouldn't know were to connect it if I wouldn't have the second port on the 900.

I keep on forgetting :) Strange one that they would have forgotten or made the mistake that the z15 and datalink in combo won't work because of a can-bus shortage

hmm what about the second can-bus on the data link or does the 2.4 only have one ? Boris