Search results

What would really interest me also beside working against vibrations by reinforcing the arms of the S800, has one of you started working with the different vibration isolators instead of the standard rubber balls ? Thanks Boris

Hi guys, there are a couple mods around in the different forums about the zenmuse being used with different cameras and lenses etc. Would be cool if we get a thread going with all the info collected. I am working at the moment on a GH3 mod, plan adapters to get the GH3 into the zenmuse z15 g...

I remember that some had issue with the GH2 Hmdi out. Not working on some converters that other cams worked with. Do you have a gh2 at hand to try it out ? If both don't work it could be a gh* hdmi out specific one. Boris

Iris never checked what the AV is really putting out. I don't even have the cable for it. It never came with the cam. The only thing knowing hat i am using a HDMI converter was checking if i can record in p and have I out. Which didn't work with the GH2 before. At the moment were you would have...

eh the Gh3 has AV out ! and yes i am using it with a HDMI converter on my Zenmuse !

hmmm it spirals out no matter in which direction you yaw ? If it only in one direction yes it narrows it down to three, but couldn't you check by rearranging this three arms. Always take of straight yaw and see in which direction is spiral off. Should at some point give you the info which arm...

does it drift off in a straight line when you don't hold roll, or does it drift of in a spiral form ? It if doesnt drift of in a straight line when yawing, than i also suspect a motors or ESCs more a motor Boris

hmmm i wouldn't fly it anymore ! Make a video and send it to your dealer and DJI support ! To me it sounds like a problem with the motors ! Ball bearings or motors loosing RPM due to an issue with them ! Please also upload a video help to diagnose what actually happening and helps other that...

As far as i remember you can switch between I & P output did you change. Your converter probably wants 1080I ! Zenmuse HDMI converter for example won't work when the GH3 is set to 1080p out. This has nothing to do with you actual record setting. Its a separate point in the settings. Boris

If it becomes a sending back to china action. If RC-drones seriously wants that from you, you know where to not buy stuff from again! Manufacturing costs are probably less than shipment back and forward. If they want to check it out themselves what could be wrong hats okay. If they confirm or...

When does this drifting off happen in gps or attitude mode ? Do you fly it in manual mode does it also happen there ? Was there ever something altered on the frame like motors or ESCs exchanged ? Arm reinforced etc. If it only happens in gps and attitude mode were is the gps unit mounted ? If...

Take the props off give it throttle in manual mode if the motors response stays the same (repaonsing nicely to your stick input) your connections to the ESCs are fine ! In general all ESCs act separately if one of the connection three phased or the signal wire are not connected correctly the...

If it works in manual it would be strange coincidence if it's the esc wiring and it only happens when you fly in attitude mode !

Okay either the baro sensor has an issue or there is something disturbing the baro sensor or blocking it to get the right pressure ! We can't read out data from the naza baro sensor so there is no direct way to check. It could be that extending the arms motors whatever causes a under pressure...

Just for testing also turn off lipo protection in the assistant !

Also hook it up to the assistant and look if you can see any jumps in the throttle slider if you keep your throttle stick in mid position !

Ok we have to rule put what the issue is baro sensor or not. Do you feel comfortable to fly it in manual mode and keep it hovering infront of you ? See if it behaves the same. If it does it's ESCs or wiring powerloss somewhere. If it doesn't there is something with your baro sensor. Can you post...

similar to this and you have the throttle stick at mid position the whole time ?

ah are you flying it inside ?

Hi Mike, what happens when it drops to the ground the motors stop spinning completely or it goes to idle motors speed. Can you show us some pictures of your build. Placement of the components soldering etc. Does it drop like fall like a stone of does it descend fast etc. Best would be a short...