Search results

Yes the programming procedure is the following. You connect over the USB to micro match program cable to the Herks. Install the driver if you haven't yet. Start the flashing firmware for the Herks, choose the right FW choose one of the ESC units that you want to flash. A B C D etc. and press...

Say im using two batteries, then through the graupner air module and then through the emcotec switch do i only need to feed power to one set of the herk cables not both? Do you think soldering all four cables to the emcotec switch would help spread the load, or would it not be needed? That...

no worries: Don't get mixed up with the diagrams on Andreas Baiers Website they are toward I2c protocol has nothing todo with what you are doing.

First thing you have to do is but on the mircomatch cable to the ribbon cable the length you need them. Forget any instructions on Andreas Baiers page that have to do with I2C thats the mikrokopter ESC protocol and has nothing to do with our PPM/PWM connection to the ESCs. Don't worry about...

One more thing. Concerning the arrangement of the motors v config octo etc. I don't now which routines your FC has when one motor goes out or the whole board ( one herk ) would shut down. But i think the approach of having a XY quad left over is probably the best ! Don't go the troublesome way...

Okay: 1. Concerning the ESC connections from FC to Herks. You can leave the servo cables the way they are no air cutting etc. The Adapter board Servo plus to Micromatch/ribbon cable already take care to let through the connections that are need. For example one could solder jumpers on the...

Ryan at diagram now will take 30 mins. Boris

Redesign my X8 conversion completely so its gonna take some more time ;( If i only had a reliable good quality cnc service here in europe :) hint hint !

I totally agreed with you Bart. The only thing that is killing me is spare parts with a price like that. http://www.goodluckbuy.com/landing-skid-fastener-fixture-parts-for-dji-s800-hexacopter-right-fastener-.html. I wish DJI would be more relaxed on the pricing of spare parts that are obviously...

To narrow this a little down. "Flat" octos WKM build ( my experience ) seem to be a little more nervous in the wind than a MK octo for example. This can be reduced by using smaller props, which again is not so cool if you went for a 900 plus frame size and want those bigger props. Now nervous...

Hi Duane, the software isn't out yet. Still being tested ! regards Boris

Yeah thats certainly not cool to get it in that state !!! I had one of the first gh2 versions so i guess back than it was still assembled with more concentration on who it balances out.

nope more than that. As far as i know you need a ground station for the thing which is more or less a container full of equipment, so 300,000 might just be the heli

okay just checked, just to get no confusion going, since i have no clue what the different modes are called. 1. 360 degree mode 2 man operator, roll can be controlled obviously. 2. Reset or FPV mode, roll can not be controlled. 3. Restricted pan mode, I can operate roll and and tilt. Boris

wait let me check i have one of the first gh2 zen FWs Boris

I can only comment on the pan, and there is a significant difference between is performance in my apartment and what it does on the field. After trying to calibrate my AQ mags in my apartment i understand why. Concerning the default fpv mode i am also not happy with that ! The pan lagging...

Looks like you are to low on your basic gains ! What are you at ? Boris

Hi Doug, normal i can't say, but i also have that from time to time. I was never concerned and didn't ever ask support at DJI if its an issue or not. Boris

as far as my test go HDMI puts out live view also during record, you can choose live view out I or P and record I or P etc. Concering the Live out AV if it doesnt work hmmm it will be a troublesome road for the hack, they already didn't make it for the GH2, ad far as I know Boris

thanks guys. Benjamin any links infos on zenmuse using it with different frames etc adapters any mods are interesting if we get them together into this thread, so the search has an end :) Boris