Search results

Hi Guys, I have been through the return procedure. Mine didn't work from day one. The whole copter collapsed on me sitting on the table. Evntually the motor stopped working completly. It not locking in nicely from beginning on was probably the indication of that. If you already bought a...

japp looke like it ;( but thanks for the effort !!!

strange one again now for 24 hours ;) **** could have been the right ones. We apologize for the interruption. To protect product information, we limit search activities on our web site. Your use exceeds typical patterns of our visitors, so we have restricted access. Your access will be...

Glad to hear that it was taken care of ! Boris

or if you are planning to buy over kopterworx you could just do that. 1. http://www.kopterworx.com/Cooming-Soon/DJI-Phantom-RTF 2. http://www.kopterworx.com/FPV-sets/58-Ghz-800mW-PRO-C-set 3. http://www.kopterworx.com/Remote-Camera-control/GoPro-3-Audio/Video-Cable 4...

What a strange website :) I can't look at them at the moment i get this info: We apologize for the interruption. To protect product information, we limit search activities on our web site. Your use exceeds typical patterns of our visitors, so we have restricted access. Your access will be...

Thanks !!! but they seem to be a little to long. WhereIi press them in I have the clamps directly after the carbon. The cinestar ones look like this:

check out the thread from fritz : http://www.multirotorforums.com/showthread.php?8621-Phantom-with-Graupner-e-props-8x5-and-video-downlink ask him which components he used. you will need a go pro hero 3 cable to video TX. You will need a video TX and RX transmitter and receiver, and...

Hi Guys need some press nuts preferably the same that cinestar is using. I remember a shop just recently opening and announcing it here in the forum and they had them just can't find the link anymore If one of you has a link it would be great. Found some shops but they are all out of stock or...

Ah great thanks chris ! Boris

Japp I would recommend that ! Not sure can't find the Savöx current draw info but a stalling servo over you receiver getting its supply from the MC ... PMU i would not recommend. I personally only use these BEC really small adjustable to different Voltage and up to 10 A output etc...

The links you gave are copters based on MK technology. Its good technology but will be a even steeper learning curve for you. Better is to stick to enclosed FC platforms like the DJI stuff. Things more or less work out of the box GPS hold Altitude hold etc. more user friendly sort of. Get...

Hi Ahemd, if you feel comfortable flying and want to spend the money. The question is for which cam you want to go first. There is a significant difference between taking up a Nex and a Canon 5d. My advice would be to start with a F550...

Hi Guys, really looking for a CNC service in Europe that one of you could recommend. Price it not the ultimate variable, more important is quality and speed, and most important keeping deadlines to have the parts like agreed on. If one of you has a good source i would be happy ! Thanks Boris

thanks gonna send him a mail !

why actually not use two of the emctec switches. Wasn't it two parts to it the switch and a cot roll unit talking to the RX. Use one control unit feeding both swichtes. Than you can keep the two lipo wire setup from the Herks and don thane to bring them together and split them again ! Boris

Hi Jochen, I wouldn't do that. I know right at the begging when the PMU came out, they published the amount of A the Bec in the PMU can deliver, i can't find it anymore though. I don't know how the PMU is set up and if the BEC included also powers the Can-bus thus all the components like the...

If you have a regulated power supply that detects shorts and it stable use that instead of a lipo for flashing ! Boris

Last email I got from Andreas he said; HKIIIv3_SW095_PPM_AFW1_kHz16_ADV18_GAS1020_STK1100_900_TMP90.acy Boris

Or actually i am not sure if they pre programmed them. Could be that they tested them before an then probably with the PPM FW. I would redo it though that you know for sure what it on ! Boris