Search results

Jack, Previously, the WKM could be turned on and the throttle was immediately "live", ie knock the stick and it would start to spin up. With the arm function, nothing works until the sticks are both moved to the bottom corners. It also means that if you inadvertantly turn off the transmitter...

I noticed the same thing when the battery gets low, it loses altitude and I have to give more throttle to keep it up. I have a voltage meter which gives a loud chirp when the battery gets to a certain level...better to have an audio alert instead of a flashing light, you immediately realise...

Okay, maybe not, but at least it's strong :) Gunter.

Gestaltung, when you adjust the parameters and click "write", does the battery need to be disconnected and reconnected, or can you just fly without resetting? Thanks, Gunter.

I expect I could...just flip the motors upside down :)

Wow Dave, good flying there! Just watch out for those low pass overs! :)

A couple of pictures of Kaitlyn. She really did enjoy flying Daves little heli, good thinking Droider :) Heres one of her holding my hexa: And she couldn't help having a snooze on the way home :)

I had the same thoughts, but went for the wires inside the booms. I don't like too much external wiring...saying that, I don't think I have used a huge amount of extra wire. A benefit of external wiring is that it's a lot easier to assemble and replace parts if needed...

Thanks Denny. I will do a bit of work on dialling in the settings some more this weekend and then do a timed flight-I'm keen to know myself! I'm hoping for over 10 minutes, fingers crossed!

Brilliant Dave, you got them all in there!

I'm sure it is, it has the same picture next to it :) I'll make sure I do that when I buy one!

Yes, brilliant pic with big and small! ovdt took this pic of mine as well:

Actually, they haven't removed HDMI, the image shows a mini HDMI port around the other side :)

No, the picture is deffo TV out, it seems they have sacrificed the HDTV out for external mic in.

The picture still shows tv out on the top of the cam...

This seems like it may be cool, if it all works properly :) http://gopro.com/hd-hero-accessories/wi-fi-bacpac-remote-combo/ You can watch a live feed on your iPhone with a free app...

You've probably installed the new firmware, which requires a new stick input to arm the heli, before you can fly. Hold both sticks down in the bottom left hand corner for a second to arm, same procedure to disarm....have a read of the latest manual :)

Rich, I had a similar problem with my gopro on my Draganflyer. What I did was add a little bit of extra weight to the camera mount, which stopped the high frequency vibration. I found that the camera was too light for the mount and was vibrating. Hope that helps, Gunter.

I would deffo make sure CG is in the middle of that plates. It just makes a lot more sense, that will make sure all the motors do the same amount of work. Totallycommitted had a CG problem this weekend at our meet, and it made a big difference when he moved his battery from the left hand side to...

Good advice Denny, thanks. Do I then just stick the positive onto a ubec? Gunter.