Search results

I do not think it has anything to do with the new owner. I build F550, Wookongs kits allot, and always use the same software. I have gotten the Network error before, but was able to just close it and continue setting up the copter.

Awesome, Thanks for the quick responce. The Precision Pairs for $35 are wood. Precision Pairs in Carbon Fiber are 10 X 4.7 and cost $142. I will be stocking the Wood pairs which work awesome. I have been very happy with them, and they really are nicely balanced. As for the Carbon's, I Fly...

Hey guys, I noticed allot of you are running Graupners on your DJI F550. I am a dealer for them and ZOAR props, and about to place a big order for some 10/5 precision pair props. My questions pertain to the DJI Motor prop shafts. Did you run into any problems mounting your Graupners due to the...

The Gains for elev/ailerons were at 120 for gyro's, and on attitude they were around 90-100. i have the gain controls set up on my slider switches of the JR11X, and set through the X1/X2 inputs of the Naza. By lowering all gains, the copter will become sluggish and less responsive. That smooths...

Hey guys, I did a couple nice videos on the DJI F550 BUILD and NAZA CALIBRATIONS. These videos are for anyone looking how to do a complete buid of the DJI F550 NAZA ARF. Also for anyone wanting some step by step details with the NAZA ASSITANT Software, Motor/TX Calibration. The videos are a...

Hey Bud, I ended up going with the longer 465mm booms. I use those on all my builds now. I just didnt like how close they were with the 430's. Personally I feel the prop tip Vortices, and down wash with props being so close, would cause problems. Just my opinion though. If you decide to use the...

I have a similar issue with the Nano Tech 6000's. My Low voltage will come on sooner while under heave throttle. It seems that its due to the voltage dropping under heavy draws. I use to keep my Low voltage alarm set to 3.7 per cell. Now I put it at 3.5. That way the alarm does not come on so...

Thanks RTRyder, Thats exactly what I have now (like 10 packs of them). They work nice when in a rush, but I am now looking for something to buy in bulk. I am doing quite a few builds now, and would like to find a good source. What Size bullet connectors would you recomend for the 16-14 awg wire?

Does anyone know of a good source for motor wire. I would like some decent Silicone 16 awg or 14 awg, Tri colors. Post a link to any source you have. Hobby King seems to always be Out of stock. What size do you reccomend for Axi Motors 2814's etc. I have always used 16 awg in the past.

I will be doing a Build Thread/Video soon. Until then, hopefully this pic shows what your asking for. Download the Manual also, It is an extremely easy build. Manual http://www.dji-innovations.com/files/frame/f550_user_manual_en.pdf The ESC's Solder right to the Board +/- The LED Module...

DJI Naza F550 Gains and Prop size The Gains for elev/ailerons were at 120 for gyro's, and on attitude they were around 90-100. i have the gain controls set up on my slider switches of the JR11X, and set through the X1/X2 inputs of the Naza. By lowering all gains, the copter will become...

Recently I have fnished Testing and flying the DJI NAZA F550 ARF. I extremely impressed and excited about this product. I am now recomending it as a trainer, to all our clients buying $10k+ Copters. The Built in Altitude Hold really is sweet. I couldnt believe how well it held its altitude. The...

Hello Nitroheadz, I am a Vendor on the Forum and carry a few nice copters. Although We focus on professional level AP Ships, we also provide excelent trainer copters. Recently we have fnished Testing and flying the DJI NAZA F550 ARF. We are extremely impressed and excited about this product...

Yes, they cost alot. These cases were designed with the Professional in mind. They are more suited for the guys with $10k-20k into their copters. When Charging $3500-5000 a day for shooting. Spending $1000 to make sure your equipment arrives on location without a problem, starts to make a lot...

I pack the Gimbal and landing gear seperately. I simply Unscew the 4 bolts holdng the gear/gimbal on, and then pack that in a seperate box. Feel free to email me at Aerialmediapros@yahoo.com. Take care, Patrick

Hey Guys, I am now supplying Completely Custom Travel Cases for your Multi Rotors. Here is the link in my Vendor Thread for anyone interested, http://www.multirotorforums.com/showthread.php?2434-CUSTOM-TRAVEL-CASES-for-your-MULTI-ROTORS-AVAILABLE&p=25835#post25835

I am having our own custom travel cases manufactured directly for AerialMediaPros.com. I provide these for all our clients builds, and will now be offering them to any one else interested. The current Case measure 38"x38"x7". They are designed for the droidworx AD8 HL frame with 465mm Booms...

Hey Bud, I appreciate your concern on my pricing. The Prop that you selected is not the same thing. the props I sell are the Precision Pairs which are hand balanced. The props you posted a link to are xoar's Lower end product line for electric planes. They are way diffrent in quality compared...

Hey guys, I just put up an add in my Vendor Section for XOAR PROPS. If your interested in ordering the precision pairs, Check out this thread http://www.multirotorforums.com/showthread.php?2365-XOAR-PROPS-Pre-order-here-carbon-fiber-precision-pairs-and-wood-precision-pairs&p=25236#post25236

Hey Guys, I am Getting ready to place an order for XOAR Props. I am a distributor for them, and should have them in approx 2 weeks. These props are my favorite yet. They are a little costly, But well worth every penny. I simply throw them on and fly. No need for the hassle and incovience of...