Search results

"apply" is dangerous, power down and its lost, it stores in volitile memory, click "save" religiously every time you change something :)

Revisited the Y4 tonite , reconfigured my minsoo kim quad into a tri, and used the landing gear and motor adaptors from my frame design, and whiped up a Y4 First test is per std Y4 accepted practice, equal props and motors , and as last time, it stunk. Rear motor speed is set to 62% of the...

i always do the esc's individually with my transmitter/ reciever, dont use the FC, it sets em to 1050/1850 (lo/hi) then i set values of 1040 and 1850 into the FC using the GCS

BTW - yes i realise I am exclude from actually being in the contest, as a buisness, but will be fun to do anyway :cool:

sounds good on the touch and goes, with a landing spot 15 feet away i can practice outside under my favorite power lines :) now to remove the LG !

Well....guess what turned up in post....a kkmulticopter Flycam Blackboard :) Minsoo sent me one to test http://www.kkmulticopter.kr/index.html?modea=vieweng&mc_selected=MultiCopter&sc_selected=KKMulticopter&sn=flycam_black&id_no=90

have one of these comming for one of the V8's will report how it works http://www.rchobbyhelicopter.com/store52/agora.cgi?product=Camera_Mounts have one of these http://www.averticalview.com/2_axis_.html will post up some results as well

Good stuff on the CC Before use you may need to update the firmware Give me a yell if ya need any help !

aparently yes, both use the same chip (hobby wing) I believe the RC timer yellow esc's are also one and the same, i have used about 30 of each with one failure from what i understand, hobbywing are the mfg, turnigy and RCT are the Hobbywing re branded

@flyeye - i like that, call it "gone copta fishin" @bart - the table idea sort-of excludes the big multi's

what could be fun is the most touch and goes on a object in a minute land on object, take off, circle object, repeat (circle around is important, saves it being a bouncing contest) you dont need to be an awesome pilot to compete, and it will help build control skills

wow thats cheap, im tempted to buy a couple, are they atmega 168's ? assume so as they mention xx software

@stacky - looks good @rock - you are just special @pete - where are the boards from ? just curious if you have found a good supply

@pete - that 14mm carbon is weak, have about 8 tubes here, going to use em for camera mounts - im using nylon cable glands to hold them

@everyone - stay away for a day (work) and you guys add two pages to the thread ! Hex looks good Pete - loose the individual ESC plugs ? , i arrange my ESC's (on the V8's) with the power wires in the centre, motor on the outside, and have all the wire go to a power dist board. Nex build i will...

OUCH ! that hurt my sensitivities - got the V flying better

get some 1/2 in ally square tube, and custome make something , how many motors have you got ? the flat 8's look cool and easy to fab

guys check this out - twin quads ! http://www.youtube.com/watch?v=bbKoqXOA4QM&feature=player_embedded#at=109