Search results

The stop stabilization must be re-engaging on its own... that's what you mean. Ok.. Gotcha !... laters..

@rene.m - If you are using pan, make sure you have the I-Gain as low as possible. As you might be able to see.. if you increase this, the 'wondering about' will become exagerated. Make sure you have very minimal values of this slider flavor. It also helps to increase the Gyro Sample Rate from...

@Mombasa, Remoteworkx, Rene.M Must say that Pan is working perfectly over here. I'm on v56_76 ,as was published on the 29th of April. Just want to make sure that in order for this to work well, AUX 1.. ie the GotoHome / E-Stop function MUST BE CENTRAL OR TOWARDS THE E_STOP. As you know this...

verwenden Sie v56_76 Firmware?

http://rotorpics.com/p3xv56/toolz_HD3x.htm Heinz... Heinz .. Ich gerne nehme es zurück, wenn Sie so sehr unzufrieden sind.

Ok.. Thanks for your feedback. I will look into this ASAP. As you describe it, it sounds like a firmware bug, but, I can only ascertain after this evening. Thanks ! George

Definitely something wrong. Please send me an email confirming your address, so that I can swap your unit... ASAP. in email title write "REMOTEWORKS - SWAP UNIT"

Hallo Heinz, Aufgrund der Beschwerden von einer Gruppe von Picloc Kunden, die über separate Eingänge PPM wurden I1 bis I5, überarbeitete ich den Code, damit bestimmte Arten von speziellen Receiver-Ausgänge, um auch funktionieren. Die Eingangsfrequenz kann bis zu 200Hz behandelt werden. So zum...

@Remoteworks... OK.. I will check again the Pan code... no change was done to the Pan firmware. Will report back in evening. Perhaps it would be best if we met on skype for you to demonstrate the issue and let me find a solution. You should be able to disable the ACC... what's happening when you...

@Tahoelight - would like to help - please send me an email with the following in the subject "TAHOELIGHT-PICLOC" .. @meme - Unit must not be moved on startup until the servos become active. If there is movement, the gyro's startup calibration will get busted, and that effect you mention is...

Hallo Freunde, ich bin traurig, der Ihre Probleme mit Picloc hören. Es ist nicht das einfachste der Themen, die mit nur einer Hand zu schaffen. Neueste Firmware ist für gut befunden von picloc Benutzer: Hier.... v56_76

From the PiclocTooloz link HERE, you will find the link to the firmwares. Attn: JetiBox users.... The JetiBox output may have a weak output with some JetiBox types. A choice of Jetibox options will have to be added to PiclocToolz, in order for this to work correctly, and will be added in next...

!!lol!!! :)

Glad you like it Søren !!

@Remoteworks.... send me an email, and we'll resolve this with a quick Skype. @Mombasa... Hope the issue with your Copterworks mount is resolved with the Settings I gave you. There should be no 'wondering' now.\ The 'Twitch' issue that you are having is due to the way the Receiver that you...

On a separate reply, I want to apologize for the lack of comms during this month... it was a freak month !! Like everyone else, I had my eyes on NAB2012... and what's coming out. Competition is nice, and motivates one to work even harder !! More info laters :)))) Back to the den....

WoW .. Jesper !!!! really like these two clips !!! What I really appreciated, and when auto level comes in handy.. is that after the tilt downs, when you go up again, the horizon doesn't come "on the piss" ... !!LoL!! <- as my friend DennyR used to say..!!

Thanks for posting this video. Mombasa... finally I get to see and appreciate the notorious twitch !! OMG !!! That's a Mega Twitch !! Please measure the voltage present on the Picloc servo outputs ( Plug in a servo lead in Servo Output 6 and measure inline with a voltmeter. ) I suspect the...

The ACC slider gets more aggressive as you UP the Gyro filter...ie at 42 HZ(gyro), the Gyro is quite filtered, so quick changes are smoothed out... and the ACC has only small (change) values to work with, the contrary to low Filter on the Gyro... at 188Hz, there is considerable to work with...

Link is correct. Navigate to the firmware.