Search results

Ok... One more step. In the Functions Tab -> Slew Setup Tab, Your Radio channels should be in the deadband when the sticks are central. What Do I mean ? So.. With your radio sticks at center, sub-trim your radio's TILT, ROLL and PAN channels from your digital or analog sub-trims, so that the...

Bit of both.... Name's meaning is a secret for now :) ... Name could have been Picloc-3X SR; Picloc-3X RS; Picloc-3XSR ; Picloc-3SRX ; or Picloc-3RSX. I chose the latter. It is equivalent to the Picloc-3X Standard.... but in a smaller and more efficient form factor. Uses the best available...

Thanks Derek for replying in good spirit. !! That's Bringing you closer to a free, NEW Picloc-3RSX :) :) :) One other thing @Speedy.... because the 'old' tutorial videos on my website, do not show well how to do a 3x 360 servo setup... and I apologize for this.... so... When you are mounting...

Søren , sending you an email right now with return address. Will fix it real quick !!

FYI.. Acceleration and smooth gains are Picloc generated ( synthesized ) servo driving signals. Their values were left quite open and 'generous', so that one is allowed as much tuning as one wants. However, my suggestion is to use minimal amount of these synthesized gains, and get faster ( and...

Hi Macin, You seem to be using potentiometer on the Tilt axis of your DIY mount ( looks interesting BTW !! ;) ) When you have feedback Potentiometer, DO NOT USE Smooth ( ie..Integral ... ie 3rd fader in the Gains Tab ) ... this is causing the tilt axis to overshoot target and cause the slow...

Christian, temperature drift, especially on the PAN axis is resolved with firmware to be released very very soon. Just finalizing and testing it so that it's bulletproof. Now I shut up!!... and go back to my thread..... but with popcorn watching this one too :)

@multihexa.. are Picloc and RSGS being friendly on the AV130 ??? !! LOL !!

OK couldn't wait.. Saw it... that's way too sensitive... should be much better. Please send me an email with a couple of zipped screengrabs (printscreen) of your (3) gain settings, and also the calibration and Options tabs.... and also a picture of how picloc is mounted on your gimbal. Or else...

Ok downloading... Will let you know later... has to be an early night this evening.

I deeply understand what you mean. I will try to translate this into firmware. :)

@remoteworks.... the issue lies in the TOOLZ..... It will display SELECT....but deep inside, its working on Gyro Only :) But.. anyway.... Fixed :)

Yes.. Tomas.... :)

OK... seeing why this is happening...and fix it. Going to release new firmware very very soon now.... has some nice new goodies :)

Nice machining work :) Looks very Light !!! Derek.. I'd still call that.. a 'semi' pendulum-assisted type though :) It gets the job done... so its good !

@Derek.,,, thanks for the kind words.... next time you purchase another Picloc, I'll send you 'double dose' of candy :) ;) :) JFYI.... Derek's Roll axis is pendulum type, assisted with a 'double link' servo... if I remember correctly.

This question should be relatively easy to answer.... It's Me.. PM or email me.

Snurre, I advised 7.2 Volts as max. However several Picloc owners have been powering Picloc with even higher voltages. The manufacturers of the components in the input stage, rate the components for 16volts. The input capacitors are rated at 25V. But it is a common practice among electronics...

The world is so small..... ( a local native saying.....) Was on a skype with one of the guys that has the issue mentioned above. Ticking 'Fill Unused Flash' in FlashMagic got the Picloc back to life. This procedure with Fill Unused Flash needs only to be done once... It will re-allign the...

Hi PPL.. I was unavailable for some days as I was out of home on big job. Contacted my webmaster.... they're doing server upgrades. Website should be up again soon.... ( nothing new in it.....just as yet :) ) As I came back.. I am now checking my inbox ( Awwwww!!!!) Support emails first are...