Search results

Not that simple Piranha.... RSGS seems to give a feedback to the servo ( where the potentiometer was connected ) by a signal generated from the unit. ( replacing the Pot ). Watch closely 1001's installation video. ie.. in other words... there are 2 servo cables per servo... one for the signal...

OK.. Will contact you laters...... Thanks !!

Hi Graham, DX7 is in the list of Supported radios.... so it should work. If it does not for your DX7, I'd really appreciate 15 mins with you on skype, to fix it also on your ( and perhaps others' ) DX7. So that this will be added to next firmware v56_78, which I've been working intensively on...

Indeed.. some Internally Stabilized lenses do not lock. Vibration removal is key2success.

@Piranha... Sorry M8!!.... you will have one soon from upcoming batch.

Seems you are using mismatching firmware and TOOLz. You should be using The Toolz and Firmware from this link. : HERE Taycuphach, those videos were done long ago... and Toolz and Firmware have been superseded. New ones are being made which compliment the upcoming version of Toolz with File...

Nope that's the older versions... TR series. Here's the link. http://www.rotorpics.com/index.php/temporary-first-info-on-picloctoolz-3x?start=2

Hi Cuong, THanks for your post. Yes.. everyone received his Picloc like you did. I will email you with a short document I'm preparing. However... Please watch the old tutorial videos that are on my website right now... They are a good start. Please email me as well... because I do not know...

Ok.. will address this with a video. Thanks !! George

you must come visit me here... barometer is always on a high lately :)

Something must have happened to make the PL loose its orientation.... if it lost orientation, then of course.. the camera will tilt or roll, depending on how much the deviation was. Did you plug the USB once landed to see what was the cause.. from the sensor's readout ??

Perhaps I did not put the question clearly.... I meant... Vibe isolation between gimbal and copter.

@Fredass... Now that you're using Picloc 'On Axis' stabilization , and NoPot... then the Gyro sample rate has to be highest... ie 188 or 256Hz. This is because the unit is self stabilizing now ! .. someone called it.. reactive mode. If you were balancing on a rope ( like circus ), you want to...

Munch... If the mount is getting into oscillations: 1) reduce Acceleration from the D slider in the Gains Tab. 2) This is a question.... Do you have a very soft vibe isolator ??

Hi>. if Picloc is not entering bootloder, try spraying a little drop of WD-40 spray ( or similar ) on the little switch. Theses switches seem to dry up for some reason...but after this operation, they stay working well for a long time. TO do this, take the top cover off, and put just one drop on...

So you're safe that I'll have one for you. only 10% of next batch are remaining free to be reserved.

For ppl who have reserved, that's soon, for others, it will be after that :) Sorry!!... I absolutely cannot give a specific date, but its quite soon.

Soon after the new Picloc is out and I have secured the stock of gyros necessary. I will set up an email account to let me have a feeler of how many of the new Gyros I should be stocking for the upgrades. Everyone will have ample time to decide after watching the comparison videos.

Hi Holco....It actually helps a lot to have the highest resolution on the Gyros. Best would be to have a FOG ( Fibre Optic Gyro ) but this is beyond most hobbyist's budget. But as every 6 months technology updates, one must keep up !!. The new gyros are such high performing, that the...

OK!! Thanks ( Dank :)