Search results

Frustration is somewhat diminished now.... Files v.56_70 are uploaded here. Krleas... Emails ...Emails ...Emails.... I promise to try :) Thankyou !!

Argh !!!!>>>>>Finally... I was for 1 complete day without an internet connection, and you can imagine how bad I felt that I couldn't upload the fixed file that Mombasa reported earlier on !! Right now I have a 100mtr Cat5 to my friendly neighbor to be able to write this :) Uploading the...

If there's no Startup LED lights etc etc.. your PL is not working. This is not FW related. Please email me so that a replacement is sent. George

Zelle...new Firmware does not suddenly STOP a Picloc from working. Firmware load went OK ?? Can you retry loading firmware to make sure that nothing is wrong with the USB socket-> USB CHip -> Picloc Main Processor path.

Bernhard.. the X1 has my preferred range on the Servo Acceleration slider ( in the Servo Tab ). The X3 simply has a multiplier of 3 on this value. Pick your preferred one. That's why there's a selection. Start with X1 if I were you. As I usually say.... the acceleration is only introducing...

Newton & Mombasa : I have added another file from what I'm doing today. Go to the firmware folder of v56, and you should find Firmware with today's date. Look at the Readme file too: Accelerometer noize is taken away. If there is a gradual buildup during the procedure mentioned above, this...

Newton & Mombasa : If you are getting drift in Roll or Tilt, there could be something wrong in how the unit is initializing. Do this: 1) Take Picloc out of your camera mount. 2) Disconnect everything external to Picloc. 3) Using only your USB as power source, power the box up, flat on a table...

>>George says he will be locked in his development cage deep underground and will be denied food, water and sleep until he has produced the update. << !!LOL!! Came up for a breath of fresh air out of the den....and hungry too :)) Mombasa... had a look at the older code...

PM sent.

Want to thank this 'community' for helping eachother in my short absence. Right now working verrrrry hard on making the 'next leap up' in firmware/Toolz/functions, and also for next batch availability, which should cover all recent requests in the pipeline. Thanks. If you want to beta test...

I apologize for short absence. Just got back from one of the most terrible weeks. Currently working on tidying up the firmware and Toolz, and incorporating a lot of fixes / adjustments as suggested by customers from various fora including this very important thread. This should bring the same...

Guys ( and girls...yes there are some cute females using PL ).... I want to apologize for my absence in posting for last days. I've been extremely and abnormally busy at my dayjob last weeks. As pointed out in the posts above, there is obviously a bug in the direct outputs of Picloc when...

Thanks MombasaFlash for your insight on P>R>T mounts and Picloc in self stabilization mode .... very valuable.

Guys.. Thanks for your patience during the downtime from my server. I did not even get a reply from them.. talk about customer service. !! Only too happy that my website is up again. ( Thanks PeterD for acknowledging ) Sorry for the downtime!! Its not due to me, but my website hoster. A quick...

Jochen... Ok... I'll fix this asap. Multihexa....>The tool can not be started unless the website of George's. You mean.. you can't download it !! Toolz will work without an internet connection ( if it has been already been downloaded and installed as per the usual case )

Hi PPl... My site was down , then back up for some time.....and now it seems down again.... Sent initial email to my ISP support but no replies yet... Regarding the issue of Proportional control lack of range... Know about it.... it's related to the change in Servo output resolution. So.. I...

No Boris..... I added two firmwares to test. These have amplified I and D terms. These were added a mere 6 minutes after the post.

Hi Dr Ray, Sorry about the USB. I can help you fix it if you have a soldering iron. Its just a question of retouching the 5 usb connections at the back of the usb, with the tip of the soldering iron...therefore refreshing the solder joint. Perhaps, having Picloc USB enabled is not a good idea...

OK.. I just updated the HD55 firmware folder with firmware called: 2012_02_22_P3X_HD55_STD_X3DL.hex and 2012_02_22_P3X_HD55_PRO_X3DL.hex These are found here. Attention while using them ! No need to factory default.... just reduce your I and D faders, and adjudt to suit. @Dr.Ray - Your...

Hi Guys, I deliberately reduced the acceleration factor, because I noticed that many ( who had/have slow servos ) are bumping this value to max in order to get maximum performance... but then... the mount becomes noisy and jittery.. and then it's not Picloc's fault !! The acceleration is...